Anyone know how they work and are intended to work? From what I gather its like a Brita water filter on steroids? And it takes batteries? What for? How much water can they process etc etc?
[looking for a good way and economic means to handle my chemical, coating and rinse water needs]
I don't have a specific info on this system but it is most likely a reverse osmosis filter system. This type of rinse water recycling system is common. I don't know if activated carbon filter is useful for this application.
I've gathered that.. But what could the need for batteries be about? They take 4 C-sized batteries and have a "test" button with a green light. What could that be about? Is current used for something, perhaps in conjuction with a catylist electrode?
This type of rinse water recycling system is common.
Yes? How are they typically used? To recycle waste water from wash cycles in conjunction with a NP (no-plumbing) system--- the micro-systems I know tend to either have a water tie-in or use the waterbaths for rinse water? Or (as I'm looking) to process tap water for the (waterbath) coating water etc.?
I don't know if activated carbon filter is useful for this application.
But what could the need for batteries be about? They take 4 C-sized batteries and have a "test" button with a green light. What could that be about? Is current used for something, perhaps in conjuction with a catylist electrode?
Ed - I bet it is a conductibity detector to let you know your water has at least 18 MOhm/cm conductance. (That's really pure by the way - just a few minutes exposure to air will dissolve enough CO2 to drop the conductivity below this value.)