So I have a bit of a funny trade here.
One of my girlfriend's father used to be a printer, and he gifted me this custom-made stainless steel sink. He originally had it created so that he could set up a line of 8x10 dip dunk tanks for developing and his darkroom.
He offered it to me when I was designing my dark room, because who says no to a custom design stainless steel darkroom sink?! Lol.
However, I didn't actually realize how long it was, and didn't realize that it wasn't wide enough for my tray. Because it's designed to be a little deeper and a little skinnier to accommodate the 8 x 10 dip dunk tank system, it's not designed for my 20 x 24 trays. Along with the other sink that I acquired that is the right width, it just doesn't fit the legnth of my wall. Essentially it's too skinny and too long for my needs.
I thought about setting up a multi level to your system where this would sit above my other sink so that I could have the JOBO inside of this one, as it's perfect for that purpose, however I decided that it would be best if I could trade someone.
I'm in school right now so I don't have a lot of money and I can't really buy another sink from somebody else so I figured a trade is the only way that I'll be able to get the shorter wider sink that I need. Although I would prefer another stainless sink, i'm open to the possibility of other designs like carbon fiber etc.
So the inner dimensions of this are ...
L. W. D.
96" x 19.5" x 10"
Just add 2 inches for the L and W numbers for the lip, and the back splash wall is just under 2 feet tall from the bottom.
Ideally to match the sink I have, these are the dimensions of the kind of sink I'm looking for
L. W. D.
60" x 29" x 7"
My total legnth of my wall in the darkroom is 11 feet so my current sink is 5 feet long and so a 6 foot (60") long would be ideal, however I could make due with another 5 foot long one so long as the inner width is ideally 29" but no less than 26". It can be wider obviously, just not thinner than 26" or the trays won't fit easily.
I got it last winter and stored it in my put up garage, sorry about the leaves I just ran in there to grab a picture quickly, it's really nice just needs to be cleaned up, it has a perfect slope to the drain which you can kind of see the slope, it's so subtle and really nicely designed.
I could probably throw in a dip dunk tank to sweeten the deal.
Please let me know if we can make a deal.
One of my girlfriend's father used to be a printer, and he gifted me this custom-made stainless steel sink. He originally had it created so that he could set up a line of 8x10 dip dunk tanks for developing and his darkroom.
He offered it to me when I was designing my dark room, because who says no to a custom design stainless steel darkroom sink?! Lol.
However, I didn't actually realize how long it was, and didn't realize that it wasn't wide enough for my tray. Because it's designed to be a little deeper and a little skinnier to accommodate the 8 x 10 dip dunk tank system, it's not designed for my 20 x 24 trays. Along with the other sink that I acquired that is the right width, it just doesn't fit the legnth of my wall. Essentially it's too skinny and too long for my needs.
I thought about setting up a multi level to your system where this would sit above my other sink so that I could have the JOBO inside of this one, as it's perfect for that purpose, however I decided that it would be best if I could trade someone.
I'm in school right now so I don't have a lot of money and I can't really buy another sink from somebody else so I figured a trade is the only way that I'll be able to get the shorter wider sink that I need. Although I would prefer another stainless sink, i'm open to the possibility of other designs like carbon fiber etc.
So the inner dimensions of this are ...
L. W. D.
96" x 19.5" x 10"
Just add 2 inches for the L and W numbers for the lip, and the back splash wall is just under 2 feet tall from the bottom.
Ideally to match the sink I have, these are the dimensions of the kind of sink I'm looking for
L. W. D.
60" x 29" x 7"
My total legnth of my wall in the darkroom is 11 feet so my current sink is 5 feet long and so a 6 foot (60") long would be ideal, however I could make due with another 5 foot long one so long as the inner width is ideally 29" but no less than 26". It can be wider obviously, just not thinner than 26" or the trays won't fit easily.
I got it last winter and stored it in my put up garage, sorry about the leaves I just ran in there to grab a picture quickly, it's really nice just needs to be cleaned up, it has a perfect slope to the drain which you can kind of see the slope, it's so subtle and really nicely designed.
I could probably throw in a dip dunk tank to sweeten the deal.
Please let me know if we can make a deal.
