This is for a Nova Quad which no longer heats up.
The issue
About 18 months ago I turned this on at the start of a printing session. Left it to warm up and when I returned the heating light was off so I thought it was good to go. But the chems were cold. I unplugged the unit, plugged it back in, noted the light was on and went away again. When I came back the light was off again and the chems were cold, one last try with unplugging and now the light won't come on at all. I tried twisting the cable, I changed the plug fuse and in the end I bought a new plug and wired that in but no joy. In summary - it was working, then worked occasionally, now does not work.
The unit is water tight with no damage. It's a bit dirty from RA4 chems. One of the floating lids has gone. You'll see in the photo cable ties around the taps: this was to stop very minor weeping (like one drip every 30 mins). This unit is good if you want to do B&W or room temp RA4, if you're handy with electronics you may be able to bring it back to life which would be wonderful.
I am happy to post this, it is fragile so it will have to be insured. Happy for local pick up, I'm just off J15 of the M40.
I'd like to get £50 plus the postage if needed.
The issue
About 18 months ago I turned this on at the start of a printing session. Left it to warm up and when I returned the heating light was off so I thought it was good to go. But the chems were cold. I unplugged the unit, plugged it back in, noted the light was on and went away again. When I came back the light was off again and the chems were cold, one last try with unplugging and now the light won't come on at all. I tried twisting the cable, I changed the plug fuse and in the end I bought a new plug and wired that in but no joy. In summary - it was working, then worked occasionally, now does not work.
The unit is water tight with no damage. It's a bit dirty from RA4 chems. One of the floating lids has gone. You'll see in the photo cable ties around the taps: this was to stop very minor weeping (like one drip every 30 mins). This unit is good if you want to do B&W or room temp RA4, if you're handy with electronics you may be able to bring it back to life which would be wonderful.
I am happy to post this, it is fragile so it will have to be insured. Happy for local pick up, I'm just off J15 of the M40.
I'd like to get £50 plus the postage if needed.