For Sale FS: Summer House Cleaning, lots of assorted Large Format knick-knacks

[dirkfletcher]

Trying to move some stuff that needs to find a new home.

First up, Lens board-a-plooza

3 Lens boards for Linhof Technika IV and above, Wista, Chamonix, Ebony and Tachihara.

• One true blue Crested Linhof recessed board with maybe a 17 or 18mm recess and a 27mm cut but can be opened for a Copal 0 if needed.
• One knockoff with a shallower 13mm (ish) recess and a 35mm cutout for a Copal 0 lens.
• Flat board with a Wista crown, also cut for a 0 shutter.

SOLD-


2 boards, one for a Tech III Linhof (I think) and a 2x3 Tech IV and above

• Linhof Technika III recess lens board (if I’m not mistaken) this was the factory board for the 90mm f/6.8 Angulon.
• Crested flat 2x3 Technika board for later cameras.

(I know what you are thinking…but it’s two different cameras and I only have a __________ (your version of Technika goes here) but I’m cleaning house and want them gone so they are cheap.
And maybe you have a III now but are looking for a baby IV…

Both boards for $60 net with free shipping in the US.



Two Lenses (for the price of one)

• Nikkor-Q 105mm f3.5 in Wista S-1 copal press shutter. Glass is clean, speed 1/15 and above are fine, below are sticky and would need to be cleaned if you needed slow speeds.
• Carl Zeiss Jena 105mm f/4.5 in an unmarked shutter (that is missing the apature scale) again fast speeds seem OK, slow speeds are sticky at best, tossing this in with the Nikkor.
• Neither lens comes with the retaining ring!

$150 for both lenses, net plus $10.75 for US ship


Here is where it starts getting wonky-

I had a bin where I was tossing parts that I thought would someday be a custom 6x12 camera but I never got further than a plastic bin of parts. My thought was to use two 6x6 (RH12) 4x5 roll film outer shells, cut them in half and join them to make one with a 6x12 opening. Then use a lever advance RH12 insert on the right side and a second insert on the left also joined (how???…TBD) and use the metal Graflex XL lens hood mounted backwards to mount a helical and a 65mm f/5.6 Super Angulon and I’d be off to the races…​

​

As you can tell, I have a bunch of parts, most are broken or in various states of disassembly. Also included is a 2x3 Graflex Spring back (with the top screw sheared off) and a 4x5 focusing hood that has one of the sides cut off (so it’s essentially unusable…) two roll film inserts, two bags of parts from the inserts, one of the shells needed and the lens hood that was going to be the front of the camera.​

​

​

$75 net plus $12 for shipping takes all.
(If you are super adventurous, for an additional $60 bucks I can provide the focusing mount, flange and screw in lens board (you will need to drill it for the 0 or 00 shutter you end up using) that are needed to make the camera. If you are interested, reach out and I’ll send you a pic of the three parts that make up the focusing mount.

Lastly-

The bones of (I think) an SC-2 Cambo 4x5 camera. The supports for both front and rear standard (without either standard though) and the rail.
Make an offer and include your address and I’ll box it up and get the actual shipping cost.



Thanks for looking!