For Sale FS: Ross Universal #3 Petzval 10" f/5...

[bliorg]

Hi, all -

Christmas is upon us, so I grudgingly offer my Ross 10" Petzval for sale:

The lens is a fantastic performer - covers 8x10 at portrait distances and vignettes a little further away. It's cut for Waterhouse stops, and while the lens didn't come with any, I made a set (f/6, f/8, f/10, f/16, f/32) out of some Garolite I had laying around. The brass is worn, and there's a slight amount (<1mm) of separation, but the glass is in very nice shape. No flange with this lens.

This is by far my favorite lens on 8x10. If I had any chance of shooting 8x10 again in the near or distant future, I'd be holding on to this lens. As it is, money flow at this time of year is more important; my loss can be your gain.

I have $350 into this lens, and that's what I'm offering it for. $350, plus insured shipping, PayPal gift. US sales given preference - been burned by international sales way too many times this year. Sorry 'bout that.

Sample images from this lens:

While not crazy swirly (an effect which I actually don't like much), you can see there's a nice amount of conservative swirly bokeh with this lens, both at portrait distances and farther away.


melissa by Scott --, on Flickr


Soldier's Graves... by Scott --, on Flickr


Herbstonne... by Scott --, on Flickr


Royal by Scott --, on Flickr

Scott

 

🛡️ Classifieds Safety Reminder: Please stay safe when buying and selling. Scams via hacked accounts are on the rise globally.

Best Practices: Always use a verified payment method with buyer protection (avoid "PayPal Friends & Family"). Services like Escrow.com are highly secure. Be suspicious of random unsolicited contact via Private Message. If you see suspicious behavior, please use the Report link on the post immediately.

[Sanjay Sen]

Hi Scott,

How did you have this mounted on the lensboard? I am asking because you mentioned that there's no flange with this lens.


Regards,
Sanjay

 

[bliorg]

Sanjay, with all my brass lenses, none of which has a flange, I cut a hole precisely the diameter of the inner thread distance on the lens, then thread it directly into the board. Others have adapted the lens to a board with duct tape, gaffer's tape, etc, or used foam core or plywood to make a quick-and-dirty board. But I've never had a problem threading lenses into wooden boards directly.

 

[bliorg]

Sale pending...

 

[Andrew Moxom]

Glad someone snapped this up..... I was starting to flinch and twitch with Petzval Acquisition Syndrome!!! Now I can use my saved money to buy some lighting gear and rest easy... This was a super deal btw for a ROSS lens.

 

[TheFlyingCamera]

So you had PAS, not GAS? Or did you PAS the GAS?