I've been accumulating cameras over the last couple years and, since I don't do that much shooting, I just can't use all of them on a regular basis so, it's time to part with a few in hopes that someone else will put them to good use.
There are no shelf queens here, except for, maybe, the FM.
I have replaced the seals using Jon Goodman's Interslice seal kits on all but one camera. All have good batteries in them.
They all seem to work just fine, with minor exceptions as noted below and all of them gave me properly exposed film.
These two were bought from KEH's as-is department and rated bargain grade. Except for seals, I could find no other problems with them.
- F3, #140xx, with red dot K screen, eyecup, no body cap.
Partial LCD fade of the display. Some of the digits on the right side are difficult to see. This started about six months after purchase.
The MD-4 rewind cover was/is missing so, I replaced it with a piece of plastic cut to size and electrical tape. No light leaks, adds to the character.
You can get the covers online for about $10. $55
- FE, #332xx, E2 screen installed, original K screen also included, no body cap or eyepiece.
Outside of cosmetic's, everything works as it should. The 2 series screens are brighter but require a plus half stop exposure compensation. $50
Paypal or money order. Your choice of shipping, at extra cost.
If you choose to pay with a money order, the item(s) will ship after I receive it and it clears.
Continental US only, please.
There are no shelf queens here, except for, maybe, the FM.
I have replaced the seals using Jon Goodman's Interslice seal kits on all but one camera. All have good batteries in them.
They all seem to work just fine, with minor exceptions as noted below and all of them gave me properly exposed film.
These two were bought from KEH's as-is department and rated bargain grade. Except for seals, I could find no other problems with them.
- F3, #140xx, with red dot K screen, eyecup, no body cap.
Partial LCD fade of the display. Some of the digits on the right side are difficult to see. This started about six months after purchase.
The MD-4 rewind cover was/is missing so, I replaced it with a piece of plastic cut to size and electrical tape. No light leaks, adds to the character.
You can get the covers online for about $10. $55
- FE, #332xx, E2 screen installed, original K screen also included, no body cap or eyepiece.
Outside of cosmetic's, everything works as it should. The 2 series screens are brighter but require a plus half stop exposure compensation. $50
Paypal or money order. Your choice of shipping, at extra cost.
If you choose to pay with a money order, the item(s) will ship after I receive it and it clears.
Continental US only, please.