I am selling my darkroom equipment that I was using to make platinum and salt prints in a space at Michael Smith and Paula Chamlee's studio in Ottsville, PA. The studio is located 1:30 from Philadelphia and 1:30-2:00 from NYC. Everything needs to be picked up, although I am willing to deliver within a 50 mile radius for just the cost of gas. I will be uploading pictures in the near future.
-
Wooden darkroom sink: 8-feet by 32-inches (interior dimensions). The sides are pressure treated 2x12s and the bottom is 3/4" exterior plywood with three removable sections of 1”x3” duckboards so chemistry flows freely underneath. Everything is nailed, glued, caulked, and urethaned to hell, and has never leaked. There is also a wooden stand and shelf under the sink where I stored plastic bins for chemicals and my trays. Total height with the stand is 41-inches.
$100 OBO
-
UV Exposure Box: 54x25x8-inches. Made from 2x8s and 1/2 plywood with four 48" 2-bulb shop lights plugged into an external power strip and gralab timer. It has 8 working T-12 black light bulbs and I will include the spare bulb I bought a few months ago. I will also include the table I built to hold it all. The table is 54x36 with 3/4" birch plywood top framed with with 2x4s and 2x4 legs. The table height is about 36".
$200 OBO
-
Nuarc Vacuum Frame w/ pump: 16x20" (actually 17x22 but gets soft 1/2 from the edges) vacuum frame in good working order I powered it up to photograph it this afternoon. I replaced the glass about a year ago. I cut the legs off the the unit and removed the locking handles so it would slide in and out of the UV box.
$125 OBO
-
Dry Mount presses: All in good working order with good and clean sponge mats.
Seal Jumbo 150 15x17.........$100
Seal Commercial 200 18x22....$175
Seal Commercial 210 18x22....$200 (This one is in storage in Yucca Valley, CA—just outside of Joshua Tree National Park)
-
Wooden darkroom sink: 8-feet by 32-inches (interior dimensions). The sides are pressure treated 2x12s and the bottom is 3/4" exterior plywood with three removable sections of 1”x3” duckboards so chemistry flows freely underneath. Everything is nailed, glued, caulked, and urethaned to hell, and has never leaked. There is also a wooden stand and shelf under the sink where I stored plastic bins for chemicals and my trays. Total height with the stand is 41-inches.
$100 OBO
-
UV Exposure Box: 54x25x8-inches. Made from 2x8s and 1/2 plywood with four 48" 2-bulb shop lights plugged into an external power strip and gralab timer. It has 8 working T-12 black light bulbs and I will include the spare bulb I bought a few months ago. I will also include the table I built to hold it all. The table is 54x36 with 3/4" birch plywood top framed with with 2x4s and 2x4 legs. The table height is about 36".
$200 OBO
-
Nuarc Vacuum Frame w/ pump: 16x20" (actually 17x22 but gets soft 1/2 from the edges) vacuum frame in good working order I powered it up to photograph it this afternoon. I replaced the glass about a year ago. I cut the legs off the the unit and removed the locking handles so it would slide in and out of the UV box.
$125 OBO
-
Dry Mount presses: All in good working order with good and clean sponge mats.
Seal Jumbo 150 15x17.........$100
Seal Commercial 200 18x22....$175
Seal Commercial 210 18x22....$200 (This one is in storage in Yucca Valley, CA—just outside of Joshua Tree National Park)
Last edited by a moderator:
