dirkfletcher
Allowing Ads
Custom built panoramic camera with a helical mounted Schneider 65mm f/8 Super Angulon. The helical is indexed for scale focusing (or zone focusing) at infinity, 20 feet, 12 feet and 6 feet. The removable 21mm Voigtländer finder has been taped to match the 2:1 ratio you get with the camera. You’ll need to used an Arca clamp for use on a tripod as the camera has a permanently mounted Arca Swiss under the lens to keep the camera sitting straight and keep pressure off the lens and helical.
The camera is built to withstand daily professional use, stainless steel hardware with metal epoxy on both sides of each joint. The only use of 3D printing are the spindle adapters to hold the 120 film in the larger 116 spindle openings.
Here is a link if you want to check out my other custom built pano and large format cameras, https://www.flickr.com/photos/dirkfletcher/albums
Below are a couple sample shots with the 65mm so you can see the angle of view of the camera.
SOLD- I’ll be posting one more from the same group (it’s twin) in a day or so.
The camera is built to withstand daily professional use, stainless steel hardware with metal epoxy on both sides of each joint. The only use of 3D printing are the spindle adapters to hold the 120 film in the larger 116 spindle openings.
Here is a link if you want to check out my other custom built pano and large format cameras, https://www.flickr.com/photos/dirkfletcher/albums
Below are a couple sample shots with the 65mm so you can see the angle of view of the camera.
SOLD- I’ll be posting one more from the same group (it’s twin) in a day or so.
Last edited: