pacviewcam
Allowing Ads
- Joined
- Jun 20, 2008
- Messages
- 235
- Format
- Multi Format
Graphic Spring Back, probably for Graphic View
$45 or best reasonable offer
This seems to be an original equipment Graphic View back, or at least it seems to be one (no guarantee). It reminds me of others I've seen in the distant past.
Outer dimension, it's 6-5/16" square, with slightly rounded corners. There are dowel pins at all four corners except along the left, where they appear to have been shaved off (the side opposite where the film holder slides in).
It's in pretty good shape, functional, no ground glass. The ground glass cover is all there, needs to be reinstalled on the rod, which is present. There's only one spring for holding it open, but I believe this type of spring can be had at a well-stocked hardware store.
It's a bit dirty, tarnished, used, but it'll work.
The back weighs about 14 oz. so figure about 1 lbs 14 oz. shipping weight from 90027.
Please Note: I wait for Paypal to clear to my bank account before shipping; this takes about 3-4 days.
Here are some pictures:
$45 or best reasonable offer
This seems to be an original equipment Graphic View back, or at least it seems to be one (no guarantee). It reminds me of others I've seen in the distant past.
Outer dimension, it's 6-5/16" square, with slightly rounded corners. There are dowel pins at all four corners except along the left, where they appear to have been shaved off (the side opposite where the film holder slides in).
It's in pretty good shape, functional, no ground glass. The ground glass cover is all there, needs to be reinstalled on the rod, which is present. There's only one spring for holding it open, but I believe this type of spring can be had at a well-stocked hardware store.
It's a bit dirty, tarnished, used, but it'll work.
The back weighs about 14 oz. so figure about 1 lbs 14 oz. shipping weight from 90027.
Please Note: I wait for Paypal to clear to my bank account before shipping; this takes about 3-4 days.
Here are some pictures:
