fp100c problem

BetterSense

Member
Joined
Aug 16, 2008
Messages
3,151
Location
North Caroli
Format
35mm
I'm trying to use FP100C in an RB67. I know the black bar on the right is due to the design of the RB67, but why am I getting the horizontal burn mark?
 

Attachments

  • scaled95image.jpg
    88.8 KB · Views: 177

StoneNYC

Member
Joined
Aug 5, 2012
Messages
8,345
Location
Antarctica
Format
8x10 Format
BetterSense said:
I'm trying to use FP100C in an RB67. I know the black bar on the right is due to the design of the RB67, but why am I getting the horizontal burn mark?
Click to expand...

I'm confused how you even got it to one side... Mine are always centered and all 4 sides have a slight black (or whatever color the dark is) bar.. but I have an RZ.

But what I see is light leak... There's a big hole somewhere...
 
OP
OP

BetterSense

Member
Joined
Aug 16, 2008
Messages
3,151
Location
North Caroli
Format
35mm
The horizontal burn is the same dimensions as the paper pull tab. Isn't it more likely that I loaded it wrong? Still, I cannot see another way to load it.
 

Ghostman

Member
Joined
Dec 5, 2011
Messages
504
Location
Switzerland
Format
Multi Format
Can it be that your rollers in your polaroid back are dirty and not distributing the developer chemicals evenly? It looks like it's not squishing through properly.
 
OP
OP

BetterSense

Member
Joined
Aug 16, 2008
Messages
3,151
Location
North Caroli
Format
35mm
I cleaned them. Is the white paper pull tab supposed to be threaded thru the rollers?
 

Ghostman

Member
Joined
Dec 5, 2011
Messages
504
Location
Switzerland
Format
Multi Format
Here is a pic. You can see the tab slot (on the left where my finger is holding back the tab) next to the roller slot on the right

.
 
OP
OP

BetterSense

Member
Joined
Aug 16, 2008
Messages
3,151
Location
North Caroli
Format
35mm
I think I fixed it. Does this look better? It seems so wrong...
 

Attachments

  • scaled95image.jpg
    69.9 KB · Views: 198

Ghostman

Member
Joined
Dec 5, 2011
Messages
504
Location
Switzerland
Format
Multi Format
Yes, for your back that looks right. The tab and photo do not come out of the same slot.
 

Truzi

Member
Joined
Mar 18, 2012
Messages
2,651
Format
Multi Format
My first try with fb100c (in a Vivitar slide copier) I had trouble figuring out where the tabs went, and mistakenly had them in between the rollers. In my case, though, the pull-tabs broke off, and I wasted a few sheets having to reload the film and try again.
 

Terry Christian

Member
Joined
Dec 2, 2011
Messages
693
Location
Memphis, TN
Format
35mm
When you insert the pack, don't worry about where the tabs are, only that you have enough tab to pull. The details take care of themselves. Slap in the pack, close the back, pull black tab, and go.
 
OP
OP

BetterSense

Member
Joined
Aug 16, 2008
Messages
3,151
Location
North Caroli
Format
35mm
Obviously I was thinking too hard about this and have paid for it with two sheets. Actually one, because the model blinked in the first one anyway.
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…