FORSTER VIEWFINDER - 2
Hello again Umut
Im glad you found my post to be helpful. However I think that using laser machinery to cut a mask for a 135mm lens would be incredibly time-consuming and expensive
. especially when all you have to go by would be a fairly low-definition photograph. You might want to use cardboard or even thick paper to start with.
Making a suitable mask from aluminium would certainly be an interesting technical challenge but personally I think this would be enormously difficult. Id suggest going a different direction.
I had a quick look on U.K. Ebay and came up with this item
http://www.ebay.co.uk/itm/E-Leitz-W...5-mm-SCHOOC-/121712412206?hash=item1c56a0062e
As you can see its a genuine Leica viewfinder and it does have parallax correction. I think this might suit your needs better. Also there are other viewfinders available for 135mm.
Incidentally heres a couple of links to a really good website devoted to viewfinders
..
http://www.mir.com.my/rb/photograph...ources/RF-Nikkor/Leica_RF/LeicaSportframe.htm
http://www.mir.com.my/rb/photograph...sources/RF-Nikkor/Leica_RF/Leica-Finder_G.htm
From personal experience using the Forster viewfinder can actually be quite tricky as even with a 75mm lens its sometimes difficult not to tilt the camera so that its pointing in the wrong direction. With a 135mm lens I think youd have severe problems.
Even with a digital camera like the Sigma DP-3 Merrill with its instant feedback it took me some time to learn to hold it properly. With a 35mm film camera like your Zorki the feedback would take a long time.
Also, in answer to another of your points, I actually found that the parallax correction was in fact quite good. It does seem to work well - at least with a 75mm lens. As you can see from one of the above links even Leica used a similar system.
Anyway - best of luck whatever you decide.
REGARDS