Foma 200 in HC-110

[EASmithV]

I have never used this film and dev combo, although I have used both quite a bit. I have some 8x10 sheets of Foma 200 in it's Arista incarnation. I was going to use HC-110 dil H (3oz Dil B + 3oz water?) to give me a longer dev time.

While the time listed on the MDC for Foma 200 in HC-110 B is 3.5 minutes, the time listed for dilution H is quite different (11.5 minutes?!?!?!)

I have found that dilution H times are usually double the dilution B times... But this is way more than that... I don't get it...

Does anyone have any suggestions? I really need these to work for a project... Is the MDC time of Fomapan 200 - HC-110 - 11.5 min @ 20C accurate?

 

[Thomas Bertilsson]

Below info from Freestyle's data sheet. HC-110 not recommended. I'd recommend to take whatever time that are recommended to you at the MDC, sacrifice a couple of sheets and do some testing. Dev times are always a starting point anyway.

DEVELOPER (Kodak HC-110) / DILUTION 1:31 / TIME (68°F/20°C) - NR

 

[DWThomas]

I'm too lazy to do the numbers, but 8x10 is like a whole roll of rollfilm -- mayhaps 6 oz of Dilution H might be a bit short on developer? (Which might be somewhat corrected, albeit not too reliably, by longer development.)

My 1.3 cents (after taxes)

DaveT

 

[Aurelien]

One of the best combination ever... Dil H 9 minutes at 24 degree celsius. For 8*10 one liter is necessary in tray.

 

[johnnywalker]

I've been using HC110 Dil "H" for 10 min @ 20C in a rotary tank (Jobo 2551) with good result. Now I'm onto Foma 100, and have been searching for times for that with HC-110.

 

[mikebarger]

What didn't you like about the Foma 200 to move on to the 100 version?

Mike

 

[johnnywalker]

Nothing not to like. I bought the 100 and 200 at the same time, just to try them both. My brain won't handle doing both at the same time.