Flash sync problems on Pentax 67II

sidearm613 · Sep 24, 2009

Hi guys. Recently I purchased a Pentax 67, and while it has been a fabulous landscape camera so far, today I encountered a major road bump while working in a studion situation. After setting up everything and getting the studio strobes plugged into the PC sync socket, I could not get the camera to trip the flash. I tried using the hot shoe grip, and that failed as well. Any advice?

Thanks,
David

sidearm613 · Sep 29, 2009

Anybody!!?????

Anscojohn · Sep 29, 2009

You tested the cord going into the Pentax, of course. Shorted it with the end of a paper clip, so you know the cord is o.k. Some times the camera pc connection get's oxidation on it. There used to be little abrasive cleaning tools that fit the pc connection. Perhaps a drop of lighter fluid on the male end, then connecting and rotating might work if a dirty camera contact is the problem.

sidearm613 · Sep 30, 2009

Anscojohn said:
You tested the cord going into the Pentax, of course. Shorted it with the end of a paper clip, so you know the cord is o.k. Some times the camera pc connection get's oxidation on it. There used to be little abrasive cleaning tools that fit the pc connection. Perhaps a drop of lighter fluid on the male end, then connecting and rotating might work if a dirty camera contact is the problem.

John, I tried both the PC socket and the hot shoe. neither worked.

Could it be dust or dirt in the PC socket? I recently took the camera to an outdoor concert, so im wondering if that could be a cause...

Or is it just faulty wiring?

Flash sync problems on Pentax 67II

sidearm613

sidearm613

Anscojohn

sidearm613

Privacy & Transparency

Privacy & Transparency