Hello APUG,
The PC/sync connector on one of my Copal 0 shutters came off, and I need to replace it. Do you know where I can buy one of these things?
Thanks so much --
Jim
Dan, thanks for the post. Unfortunately my shutter doesn't have the same screw-secured post. It just has a hole for a single connector. Any other ideas? B&H doesn't seem to carry what I need here.
But that "single connector" must be fitted inside the shutter. So even if modifications would be necessary a connector with flanges seems the best alternative in case the proper connector is not available.
Some shutters have a "pressed in " PC socket. The socket is a pressure fit into the case but with tight fitting cable and twisting motion they can come loose. The internal sync may be a simple contact that connects the outer sleeve to the center contact by mechanical action or contacts from the socket that make and break by mechanical action.
Your best bet is to take the shutter to a repair shop and let them replace the socket. The shutter should be modifiable to use the type shown on the B&H site if the original style is no longer available.