fixing a junk store find

Robert · Aug 16, 2003

I've got an Ansco/agfa folder. Shutter is good. Bellows are great. I thought the lens focussed. The test roll proved that to be a mistaken belief. I stuck some tissue paper on the film rails and guess what it doesn't look like it ever changes focus. From doing a little research it seems frozen focussing is normal. It relates to the lubricant failing. So has anybody taken one of these lenses apart and relubed them? With my luck it's stuck on 15feet. Not what I wanted-))

Konical · Aug 16, 2003

Robert--

Apparently frozen focusing due to hardened lubricant is to be expected with many of these old front-element-focusing folders. If I recall correctly, I read somewhere that using lighter fluid (caution--extremely flammable!) will sometimes resolve the problem, but it may take a long soak. I tried it once with the lens from an old Ansco Speedex, but even after several days of soaking, it was still frozen so tightly that the force I used ended up cracking the element. Glad it wasn't an Apo-Lanthar!
There is a gentleman in Pennsylvania, Jurgen Kreckel, who routinely refurbishes old folding cameras and then offers them on E-bay. If the photos are any indication, he does a great job.
Here are a couple of web sites for further information:
foldingcamerasrestoration.com
foldingcameras.com/articles.htm
In addition, kyphoto.com/classics/forum/ has a ton of postings about specific types of camera repair problems.
Hope this gives you a starting point.

Konical

Robert · Aug 17, 2003

I found a reference to using contact cleaner. Looks like I'll also need a set of small screwdrivers. I'm hoping things will be back to normal tomorrow and I can pickup what I need. Kind of irrating other then the fact it doesn't focus the camera seems perfect. If only it had been stuck on infinity-))

Thanks

brimc76 · Aug 17, 2003

I have used lighter fluid on an old Novar lens to clean up the hardened lubricant and it seems to have worked fine. Be sure you are in a well ventilated area. As for screwdrivers, I bought a small set of slot/phillips drivers from Radxx Shxxk and just filled a couple of the small ones down for the sizes I needed. (Robert, you could also try Cdn. Tire for the screwdriver set).
You may need to soak the lens for a while.

Robert · Aug 17, 2003

I'm going to the shack tomorrow. Want to look for a battery powered radio-))) Hopefully everything goes well tomorrow but I've got my doubts.

BobF · Aug 17, 2003

I used lighter fluid on an Agfa Isolette and while it did work well for a while it slowly got stiff again over the next two weeks. It didn't completely freeze up though.

Robert · Aug 17, 2003

Did you relube it after cleaning? I figure if I'm going to remove the old lube I should replace it.

BobF · Aug 17, 2003

No, I didn't take it apart since it seemed to work so well at first. That's on the back burner of TTD's that I'll get around to someday.

brimc76 · Aug 17, 2003

I didn't relube the Novar after I cleaned it either. It has stiffened a little but not to the point that I want to take it apart again and do the refocusing. I actually have it at the point where it is decently sharp.
By the way I didn't actually fill my screwdrivers - I filed them.

JHannon · Aug 20, 2003

I repaired two Isolette folders with stuck focusing rings. You really have to remove the front element and carefully clean all the old lubricant out to make it a permanent repair. I used a lubricant from Microtools called "Super Lube Grease" to re-lube. When the front element is removed, it's position for infinity focus will have to be re-adjusted. I use Ed Romney's method (from his camera repair book)to set the infinity focus.

I would be careful about flooding it with solvent. The loose gunk can get into the shutter works and blades.

Good luck, these old folders are fun to use!

Regards,
John

Robert · Aug 21, 2003

I removed the front element and I'm not sure there was any lubricant. Well maybe a dap in one place. I think I need a way of setting focus up better. Or at least something better to use to focus on. The tissue paper trick doesn't seem good enough.

JHannon · Aug 21, 2003

Robert, here is the method I used to adjust infinity focus...

http://members.tripod.com/rick_oleson/index-123.html

Regards,
John

Robert · Aug 21, 2003

Interesting. I just tried it and it seems I'm okay. I guess I should really just load some film and try it out.

Thanks for the link.

fixing a junk store find

Privacy & Transparency

Privacy & Transparency