Feasibility Study: Rolleiflash with radio trigger.

baachitraka · Feb 24, 2015

Is it possible to take,

http://www.kameramuseum.de/0-fotokameras/rollei/automat/rolleiflex-6x6.html

rolleiflash and modify it to take radio triggers instead of flash bulb?

If not, how difficult is to install a radio trigger inside the battery box of rolleiflash? I may rip Yongnuo RF-603 and put it inside the battery box and solder the sync-cables permanently.

Thanks for your ideas.

trythis · Feb 24, 2015

Do you have this device? It would help to see the back and open it as well.

bdial · Feb 24, 2015

Almost anything is possible, if you're determined enough.

Probably the easiest way to do it would be to mount the radio trigger onto the reflector with leads through the bulb socket connecting the trigger's shoe to the sync circuit.

From other pictures of the Rolleiflash, it looks like the battery enclosure is metal, and that would probably interfere with the radio trigger's antenna if you put the trigger inside the battery case.

baachitraka · Feb 24, 2015

I will be happy to use the bulb socket and for that I may need a kind of adapter(I'm afraid that never existed till now) to connect the radio trigger and the sync-cable.

Interference need to be considered too...

Jeff Bradford · Feb 24, 2015

It depends on the flash sync from the camera. If the camera can do X-sync, no problem. If the camera does M-sync, the flash will trigger before the shutter is open.

baachitraka · Feb 24, 2015

I have rolleicord Va.

snapguy · Feb 24, 2015

seems

It seems to me that this is not the way to go. The Rolleiflash does bayonet easily into the front of your camera but the reflector is large and awkward. Why not use a flash bracket that attaches on the bottom of the camera via the tripod socket, one with a hot shoe on top?
I purchased a Rolleiflash in about 1956 to go with my Rolleiflex and it is the only Rollei accessory I actually hated. The flash is too near the lens to get good flash photos, the shadows are terrible. The Rolliemeter eye-level focus gizmo was delicate but worked swell and the 35mm adapter is great. I even had a panoramic gizmo that worked very well. It's still very hard to beat a Rollie for some things.

baachitraka · Feb 24, 2015

Yeah I have such a setup with sync cable that have Rollei lip lock. It works but sometimes it is very awkward to carry the bracket around.

baachitraka · Feb 24, 2015

I will hunt for a broken Rolleiflash and see how it goes.

sjauch · Feb 24, 2015

Repurposed the bayonet mount from the rolleiflash. Maybe this setup would work for you.

Rolleiflex 3.5b with flash. by Iron Sight Images, on Flickr

baachitraka · Feb 25, 2015

Yep. That looks rather easy to achieve. I may mount continuous LED light for focus assistance ;-)

May we have the break down images of that flash handle.

sjauch · Feb 25, 2015

I'll take some photos in the next day or two.

It's comprised of the Rollei flash arm. Remove the back battery cover and the arm simply unscrews from the body.

a 3/8 to 1/4 adapter
https://secure.bhphotovideo.com/c/s...aded+Post&N=10824417&InitialSearch=yes&sts=pi

and a hot shoe adapter which is 1/4 thread on the bottom with pc sync
http://www.bhphotovideo.com/c/product/621574-REG/Interfit_STR116_STR116_Hot_Shoe.html

cloudroot · Oct 4, 2015

Hey sjauch, nice work with flash on a rolleiflex.
I have a rolleimagic (bayonet 2) and want to attach a flash to it.
I have a rolleiflash (bayonet 1) and a Canon 580EXii
Am at a loss of how to attach either.
Any ideas/advice would be great.

cloudroot · Oct 4, 2015

Anyone else got a flash onto a rolleimagic?

M Carter · Oct 4, 2015

Might be an idea to see if you could just mount a hot shoe to the camera and wire it tot eh contacts... or a cold shoe and a PC jack? Could give you some flexibility.

Kind of fun to shoot with a Diana or Brownie that's triggering a bunch of Speedo packs & heads...

Feasibility Study: Rolleiflash with radio trigger.

Privacy & Transparency

Privacy & Transparency