Exotic Coverings for MF Cameras?

Andrew Moxom

Member
Joined
Feb 2, 2007
Messages
4,888
Location
Keeping the
Format
Multi Format
Sandy, you might want to try a custom car interior place or two. I know Katskinz Leather has some funky leather for car seats. They might have some offcuts and supply ideas for you? Could be interesting to see a snakeskin covered Mamiya 7
 

Kerik

Member
Joined
Nov 24, 2002
Messages
1,634
Location
California
Format
Large Format
Come on Sandy, fess up, what camera are pimping out? You should get a bedazzler to go with the gold lizard skin.
 
OP
OP

sanking

Member
Joined
Mar 26, 2003
Messages
5,437
Location
Greenville,
Format
Large Format
Kerik,

I have this Mamiya 7 camera that is cosmetically a 3 or 4 but is perfect working condition. So I thought, what the hell, nothing to lose by trying to dress it up. You know, some pigs really look better all dressed up!!

Unfortunately cameraleather.com does not appear to support the Mamiya 7, and I can see why since this camera is just coated on the outside, no leather.

Sandy



Kerik said:
Come on Sandy, fess up, what camera are pimping out? You should get a bedazzler to go with the gold lizard skin.
Click to expand...
 

David A. Goldfarb

Moderator
Moderator
Joined
Sep 7, 2002
Messages
19,974
Location
Honolulu, HI
Format
Large Format
You might try a bookbinding supplier, like Talas--

http://www.talasonline.com/

The leathers are fairly similar, and in some cases identical, to the materials used on cameras.
 
OP
OP

sanking

Member
Joined
Mar 26, 2003
Messages
5,437
Location
Greenville,
Format
Large Format
I appreciate the information. Actually, www. cameraleather.com was the kind of source I was looking for but they don't have a kit for my camera, the Mamiya 7

And now that I have looked closely at the camera I believe the only option will be to brush or spray some type of rubberized coating. Covering this camera with leather or any type of skin would appear to be out of the question because of the design.

Sandy
 

archphoto

Member
Joined
Dec 14, 2008
Messages
960
Location
Holland and
Format
4x5 Format
Before you get realy started: make templates !
And save the old coverings, in that way you can have a diferent camera each year....... GOOD FOR GAS !

Peter
 

jasonhall

Member
Joined
Dec 10, 2008
Messages
175
Format
Medium Format
Even if camerleather.com does not have a kit, they will for sure cover it for you with any of the materials that they have. Just email Morgan there and I am very sure he will set you up with out a problem. He will also sell you the material so you can cut it and install it your self. If you send it to him and let him cover it for you, he will then be able to offer it as a kit from now on. It will cost a little more to let Morgan do it for you, however, you can rest assured it will be very well done. Just email Morgan and tell him what you have and what you want on it and he will normally give you a pretty solid quote via email.

Jason
 

Terence

Member
Joined
Mar 9, 2005
Messages
1,407
Location
NYC
Format
Multi Format
How about Rhino-Coat, like they use for the beds of pick-up trucks?

Seriously though, how about some of the self-adhering neoprene? It comes pretty thin, the adhesive is probably strong enough to hold to the old coating, and it'll provide some protection and grip.
 

elekm

Member
Joined
Sep 12, 2004
Messages
2,055
Location
New Jersey (
Format
35mm RF
You can buy sheets of different materials from cameraleather.com and then cut it yourself. I've done that with several cameras -- always because the original covering had deteriorated significantly.

Cameraleather.com has a nice selection of materials, but shipping sometimes can be very, very slow and often require numerous e-mails.
 
OP
OP

sanking

Member
Joined
Mar 26, 2003
Messages
5,437
Location
Greenville,
Format
Large Format
I contacted www.cameraleather.com about the Mamiya 7 and am waiting to hear from them. However, I suspect that the contours of the Manmiya 7 would make it very difficult if not impossible to cover with any kind of leather, but I will see what they say. BTW, the site mentions that Morgan died last year.

In fact I am not so much looking to pimp out my Mamiya 7 but to make it less unattractive. Although it works perfectly and the rangefinder is in good alignment one of the previous owners did not take good care of it and it has lots of scratches on the outside coating. KEH rating for appearance would probably be UG-. I am considering applying myself one of these paintss that gives a textured rubberized appearance since it apears that the cobra or lizard skin may not be an option.

Sandy
 

Buster6X6

Member
Joined
Nov 29, 2004
Messages
715
Location
London Ontar
Format
Multi Format
Hi Sandy
I have used cameraleather.com for two of my Bronica's. I took old leather off cleaned glue and used old leather as template. Really beautiful. I would recommend it. If leather is fragile make paper templates cut and dry fit and then peal off the backing and stick it on.

I hope this will entice you to do it your self it is easy.

Greg
 
OP
OP

sanking

Member
Joined
Mar 26, 2003
Messages
5,437
Location
Greenville,
Format
Large Format
Well, I received a response to my inquiry to www.cameraleather.com. As I suspect, the word is that because of the molding construction of the Mamiya 7 covering it with leather is not a viable option.

So the options are back to, 1) do nothing, or 2) attempt to cover it myself with some type of coating that will cover and hide the surface scratches.

Sandy



 

Richard Wasserman

Member
Joined
Mar 17, 2004
Messages
726
Location
Wilmette,Ill
Format
Multi Format
Sandy,

I strongly suggest option #1. I can't imagine what kind of coating you could use that would properly adhere to the factory coating on the Mamiya. I can foresee you using something that will then start to delaminate and you will be worse off than you are now. If you removed the original rubberized surface down to bare metal would be a different story...

Richard Wasserman
 

Larry Bullis

Subscriber
Joined
May 23, 2008
Messages
1,257
Location
Anacortes, WA, USA
Format
Multi Format
Has the Nauga become extinct? Unborn baby naugahyde used to be favored for such uses.

Seriously, though, a friend of mine way back when found a snakeskin handbag, decided that his Nikormat would look better dressed in something else, peeled off the covering and simply replicated it cutting from the bag. It was quite handsome. I have a salmon leather that I'm going to send to Cameraleather (sorry to hear about Morgan's passing; it was he I was corresponding with) and have them cut it for my old M2. I got this from a company in Vancouver; I'd look up the source if anyone is interested. They sent me a sample of light gold colored sea bass leather that was quite nice. I want my M2 to look very uninteresting, though, so I got this greyish brown material that looks good but won't attract attention.

I wonder if there is an aircraft coating that might be UV cured that could simply be painted on and exposed in your exposure unit. My wife's ex (former fighter pilot) built his own airplane. I could ask. I know he knows a lot about that sort of thing. It would perhaps be possible to collage the camera as desired, then coat it with a clear coating and expose it. Porno? Far Side wiener dogs? Whatever you want.
 

jasonhall

Member
Joined
Dec 10, 2008
Messages
175
Format
Medium Format
Yes Morgan Senior passed away, however, Morgan Jr is alive and well. Or so I hope since I recieved an e-mail from him just a week or so ago.

Jason
 

TheFlyingCamera

Membership Council
Advertiser
Joined
May 24, 2005
Messages
11,546
Location
Washington DC
Format
Multi Format

Just don't use the coating they applied to the Hindenburg - a mix of petroleum distillates and aluminum salts, among other things. One electrostatic discharge and your camera would explode in your hands!
 

Larry Bullis

Subscriber
Joined
May 23, 2008
Messages
1,257
Location
Anacortes, WA, USA
Format
Multi Format
TheFlyingCamera said:
Just don't use the coating they applied to the Hindenburg - a mix of petroleum distillates and aluminum salts, among other things. One electrostatic discharge and your camera would explode in your hands!
Click to expand...

Especially since some of us keep our cameras inflated with hydrogen.

I expect that coating has been retired. Let's hope. They aren't building magnesium bodied cameras are they?
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…