ETRS back problem

[MirekJ]

Hi,
I'm new Bronica owner and new user of APUG forum. This is my first post.
I bayed ETRS body with 120 back. And I have a problem. When I crank shutter, the film on the back don't moving. I must moving it to next still with the hand-wheel on the rollback. I was looking on the body, the rack for film drive is too "deep".
I was looking for manual, repair manual. I can't find reason for this. Something is broken?
Can somebody help me?

Sorry for my English.
MirekJ

 

[jime11]

film advance

Hi:
It may be that the multiple exposure lever is in the wrong position - take a look on page 13 of this on line manual. You may find the trouble.
Butkus is well known for his free manuals web page.


http://www.butkus.org/chinon/bronica/bronica_etrs/bronica_etrs.htm

 

[MirekJ]

Hi:
It may be that the multiple exposure lever is in the wrong position

Thanks for your answer.
I checked it, it's in totally wrong position. It is moving this and that without any reaction. Probably something is unscrewing. But now is too late to repairing it.
One more thanks.
MirekJ

 

[jime11]

Hi:
When you flip the lever up you will not notice anything happening just try to crank the film & see if it advances with the lever in the up position.

 

[MirekJ]

Today I removed right cover of the body. The pusher lost the pin and don't switching the multiple exposure lever. Happily I was the compatible nail. Now all is OK