Equipment pieces question

RonKolos

Member
Joined
Feb 3, 2025
Messages
14
Location
London, UK
Format
Digital
Hi everyone,

I'm not an expert with film cameras. I just bought an old Canon EOS 500 body, and it came with some pieces that I'm unsure about. I would be grateful if you could please see attached photos and let me know what these items are and how to use them.
 

Attachments

  • 20250210_112050.jpg
    1.8 MB · Views: 58
  • 20250210_112101.jpg
    954 KB · Views: 59
  • 20250210_112111.jpg
    608.3 KB · Views: 58
  • 20250210_112058.jpg
    773.1 KB · Views: 59

bernard_L

Member
Joined
Feb 17, 2008
Messages
2,062
Format
Multi Format
  • Cokin filter holder. Should have a threaded ring to affix in front of lens, like a filter
  • 85A filter: to use artificial (tungsten) light film in daylight; unlikely to use nowadays
  • What looks like a Cokin polarizing filter. Makes the sky a deeper blue, especially in directions at 90° away from sun
  • Cable release. Little thingy protruding at the base of the plunger might have something to do with a latch, i.e. to keep the plunger in the "push" position; might be confirmed by the 3rd pic where the tip is "out", presumably without anybody pushing the plunger.
 

MattKing

Moderator
Moderator
Joined
Apr 24, 2005
Messages
53,350
Location
Delta, BC Canada
Format
Medium Format
Thread moved - "Miscellaneous Equipment" seems to fit better.
@bernard_L is correct. The "thingy" is used to lock the shutter open, which you need to do when you want to make time exposures that are several seconds in duration. You use a cable release to release the shutter for those long exposures, because if you try to use your finger to do that the camera will shake and the photo will be blurry.
You would normally mount the camera on a tripod for those long exposures.
 

Mike Sowsun

Member
Joined
Jan 11, 2024
Messages
15
Location
Peterborough Ontario
Format
35mm
The shutter release cable is from an old manual focus film camera with a conventional shutter button. The EOS cameras have electronic shutters and that cable will not work.
 

eli griggs

Member
Joined
Nov 15, 2005
Messages
3,857
Location
NC
Format
Multi Format
Mike Sowsun said:
The shutter release cable is from an old manual focus film camera with a conventional shutter button. The EOS cameras have electronic shutters and that cable will not work.
Click to expand...

Keep the shutter release, in your working bag, as you never know when you'll want it.

Electric releases are needed with this camera, but the world is too small not to be prepared for odd ball occurrences.

IMO,
Eli
 

MattKing

Moderator
Moderator
Joined
Apr 24, 2005
Messages
53,350
Location
Delta, BC Canada
Format
Medium Format
Mike Sowsun said:
The shutter release cable is from an old manual focus film camera with a conventional shutter button. The EOS cameras have electronic shutters and that cable will not work.
Click to expand...

Correct - I missed this because my version of the camera was badged as the Rebel 2000 in my marketplace.
Some cameras give you options between electronic and mechanical cable releases, depending on which accessories you have, so it is never a bad idea to have one of the mechanical ones around.
 
OP
OP

RonKolos

Member
Joined
Feb 3, 2025
Messages
14
Location
London, UK
Format
Digital
Thanks for your replies everyone. That's very helpful. I'm happy with that plunger cable thingy - I found the shutter whole where to screw it into. I've never made a long exposure photo before and always wondered how people get them looking so great (i.e. when theres moving cars creating light trails and the background buildings are clear and sharp still, or when the water looks smooth and soft or a moving river looking streaked and soft).
 

koraks

Moderator
Moderator
Joined
Nov 29, 2018
Messages
23,672
Location
Europe
Format
Multi Format
RonKolos said:
I found the shutter whole where to screw it into.
Click to expand...

But not on the Canon EOS 500 you mentioned, I assume. As pointed out, the cable release you've got is not compatible with that particular camera. The EOS 500 camera uses a cable release with a 3-contact 2.5mm jack plug. The Canon product type is RS-60E3 and it looks like this:

3rd party clones are available for around $15.

I agree with @eli griggs that you should keep the mechanical cable release, since there are many cameras out there that use one; particularly cameras made up to around 1990 (and even some after that).

RonKolos said:
i.e. when theres moving cars creating light trails and the background buildings are clear and sharp still, or when the water looks smooth and soft or a moving river looking streaked and soft
Click to expand...

You also want to use a tripod for those shots. But yes, that's the kind of scenario where a cable release is nice to have.
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…