Efke PL100 developed in...?

tim atherton

Member
Joined
Sep 19, 2002
Messages
551
(not pyro ) - any other recommendations for developers for PL100 sheets?

Favourites?
 
OP
OP

tim atherton

Member
Joined
Sep 19, 2002
Messages
551
thanks - I was looking at the efke 100 tech sheet on the J&C site and had missed that chartI'd missed
 

nworth

Member
Joined
Aug 27, 2005
Messages
2,228
Location
Los Alamos,
Format
Multi Format
I've used Rodinol and had decent, but grainy, results. There is always D-76, which gives good results with just about anything.
 

Flotsam

Member
Joined
Sep 30, 2002
Messages
3,221
Location
S.E. New Yor
I've done kb100 in Xtol stock with very nice results. Today I'm going out with several holders of pl100 and I think I will try that again.
 

User Removed

Member
Joined
Sep 29, 2004
Messages
1,296
Format
Plastic Cameras
I was pleased with the results I got using HC-110, dilution B.

(...but more pleased with the results from Pyrocat-HD!)
 
Last edited by a moderator:

David A. Goldfarb

Moderator
Moderator
Joined
Sep 7, 2002
Messages
19,974
Location
Honolulu, HI
Format
Large Format
I answered over on the LF forum, but in addition, these shots are all Efke PL100 4x5", EI 200, Acufine 4 min. at 68 deg. F, agitating every 30 sec. in a Nikor tank. Click on the image to cycle through about half a dozen shots--

http://www.echonyc.com/~goldfarb/halloween/
 

Ole

Moderator
Moderator
Joined
Sep 9, 2002
Messages
9,245
Location
Bergen, Norway
Format
Large Format
Beutler's, 10 min, or Rodinal 1+24, 8 min. Both on a JOBO CPE. 5x7" negs are just great, but I'm beginning to consider cutting the development back by a little bit.
 
Cookies are required to use this site. You must accept them to continue using the site. Learn more…