This Durst RCP20 can print up to 8x10 in B&W or color. I personally modified it to work for RA4 and it works amazing. Everything is clean and it has been used lightly. It will come with two timing belts - one for b&w and one for color. It will need the larger gear which I unfortunately had to use for another project.
You can order that gear from mcmaster carr, which should have 30 teeth and a diameter of 54 mm. Better yet, put a variable speed motor in it and you won’t have to change the gears again. I sadly don’t have the time, otherwise I might keep it!
I’m selling because I now have a larger processor.
Asking $1200 but open to offers. I’m based in the PNW, it can be shipped or locally picked up.
You can order that gear from mcmaster carr, which should have 30 teeth and a diameter of 54 mm. Better yet, put a variable speed motor in it and you won’t have to change the gears again. I sadly don’t have the time, otherwise I might keep it!
I’m selling because I now have a larger processor.
Asking $1200 but open to offers. I’m based in the PNW, it can be shipped or locally picked up.