Richard Man
Member
- Joined
- Sep 24, 2005
- Messages
- 1,301
- Format
- Multi Format
Just bought a used Durst M605 with the Colour Head. Is it OK for lights to come out from the back or is something not installed correctly? Thanks.
gbroadbridge said:I dont get much leakage from the back of my M605. The biggest problem is leakage from the light box mix lever slot on the right hand side of the head. That was solved with some black paper tape that simply has to move when I switch from 35mm to 6x6
Graham.
Probably OK - depends how bright it is... To be safe, either paint the back wall matt black or tape a sheet of black paper (or a strip of black velvet etc) on it if you can't paint the wall. If you block the hole the light is coming through, it may make the enlarger head overheat.didjiman said:Projected to the back wall half a foot away, the light patch is about 2-3" diameter. Is that OK?
Thanks.
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links. To read our full affiliate disclosure statement please click Here. |
PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY: ![]() |