jbrianfoto
Allowing Ads
I have the following parts available for the Laborator L 184 enlarger.
VADAP Tilting Base Mounting plates - used to make perspective adjustments to the plinth. Bolts right onto a standard riser arm - will probably also work on the SM183 and the L 139 since they both use the same lower base assembly.
$200 picked up form my home in Fredericksburg, VA. 22405.
Shipping would be about $50 - $60 depending on your location
VADAP Tilting Base Mounting plates - used to make perspective adjustments to the plinth. Bolts right onto a standard riser arm - will probably also work on the SM183 and the L 139 since they both use the same lower base assembly.
$200 picked up form my home in Fredericksburg, VA. 22405.
Shipping would be about $50 - $60 depending on your location