Does sodium tungsten change the sensitivity with Ziartypes?

Mainecoonmaniac · May 7, 2014

I've been experimenting with Ziatype. Without sodium tungsten, the prints are a bit cold for my taste. Adding it warms the print up. Does sodium tungsten change the speed or contrast of the prints. My preliminary test so far doesn't indicate that. What's your experience?

Loris Medici · May 10, 2014

IME it doesn't change much the speed but lowers contrast considerably. BTW, I don't feel the need of adding sodium tungstate anymore; when I need warm prints I just dry the coated paper longer... (Gives chocolate browns instead of yellowish/gold browns you get w/ sodium tungstate.)

Regards,
Loris.

Mainecoonmaniac · May 10, 2014

Thanks Loris. Came through for me again. Do you get a good Dmax with a dryer emulsion?

nsurit · May 12, 2014

Hmm, no Tn and let the paper dry longer. Sounds interesting. When you say longer, what does that mean to you?

Loris Medici · May 13, 2014

Hi all, you get a slightly lower dmax by drying more. It depends much on how dry the paper was. Too dry and the print is too warm / dmax not satisfactory. But it's possible to find the correct amnt. of moisture giving nice chocolate brown prints with convincing dmax. My usual drying time with Ziatype is 10-15 minutes (at 22C, 50-60% RH), you'll get warm prints by drying the paper 20-30 (or slightly more) minutes in the same conditions. Depends much on your RH, a humidification chamber a la Dr. Ware is handy. (See H4 in "Salt hydration chambers" section @ http://www.mikeware.co.uk/mikeware/New_Chrysotype_Process.html) Test...

BTW, I'm not totally against sodium tungstate. It works nice with some kinds of prints - when you need a golden yellow tint...

Regards,
Loris.

Mainecoonmaniac · May 14, 2014

Thanks again

Loris Medici said:
Hi all, you get a slightly lower dmax by drying more. It depends much on how dry the paper was. Too dry and the print is too warm / dmax not satisfactory. But it's possible to find the correct amnt. of moisture giving nice chocolate brown prints with convincing dmax. My usual drying time with Ziatype is 10-15 minutes (at 22C, 50-60% RH), you'll get warm prints by drying the paper 20-30 (or slightly more) minutes in the same conditions. Depends much on your RH, a humidification chamber a la Dr. Ware is handy. (See H4 in "Salt hydration chambers" section @ http://www.mikeware.co.uk/mikeware/New_Chrysotype_Process.html) Test...

BTW, I'm not totally against sodium tungstate. It works nice with some kinds of prints - when you need a golden yellow tint...

Regards,
Loris.

You're saving me a lot of work. I did make some prints with sodium tungstate and I like the yellowish brown. I'll just have to experiment.

Best,
Don

Does sodium tungsten change the sensitivity with Ziartypes?

Mainecoonmaniac

Loris Medici

Mainecoonmaniac

nsurit

Loris Medici

Mainecoonmaniac

Privacy & Transparency

Privacy & Transparency