DIY repairs: What's next in Vienna?

Andreas Thaler

Subscriber
Joined
Nov 19, 2017
Messages
4,376
Location
Vienna/Austria
Format
35mm
Now that I've (nearly) completed the two big repair projects, the Minolta (Maxxum/Alpha) 7000 AF and 9000 AF, I'm considering what to do next.

I still have a lot of tasks waiting in my box for repairs.
  • One is the Canon A-series SLRs, which fascinate me but where I won't be able to contribute much new. There are already many excellent repair reports on this online.
  • The Canon T90 is still waiting for me to remove its shutter and check it for the infamous EEE error. This presents me with a demanding soldering challenge.
  • I'd also like to take a look at some first-generation Minolta AF lenses with oily apertures.
  • Also, there's the Nikon MD-4 motor drive for the Nikon F3 and
  • a Nikon FG both in unclear condition.
If there's any particular interest, please let me know; otherwise, I'll keep going as long as I can still hold a screwdriver

One more note about the presentation here:

I've promised @koraks, @MattKing and myself to bundle the reports into one thread each topic, so that there are no more parallel threads that have sprung up from my enthusiasm

This should make it more manageable.
 
Last edited:

ic-racer

Member
Joined
Feb 25, 2007
Messages
16,478
Location
USA
Format
Multi Format
I vote for the MD-4.

I don't have that, but I did just start bidding on a MD-12 for my FM. It is listed as 'parts or repair.' I don't have experience with any of the Nikon add-on motor drives yet.
 
OP
OP

Andreas Thaler

Subscriber
Joined
Nov 19, 2017
Messages
4,376
Location
Vienna/Austria
Format
35mm
I vote for the MD-4.

I don't have that, but I did just start bidding on a MD-12 for my FM. It is listed as 'parts or repair.' I don't have experience with any of the Nikon add-on motor drives yet.

The MD-4 is built like a tank, and there's some interesting electromechanical engineering to see. I've collected a few MD-4s, including some battery electrolyte victims.

Thanks for your interest.
 
OP
OP

Andreas Thaler

Subscriber
Joined
Nov 19, 2017
Messages
4,376
Location
Vienna/Austria
Format
35mm
I don't have that, but I did just start bidding on a MD-12 for my FM. It is listed as 'parts or repair.' I don't have experience with any of the Nikon add-on motor drives yet.

I've already tried my hand at an MD-12.

The internal wiring is very limited, so every millimeter is cut. Reassembly is accordingly tricky.

 
OP
OP

Andreas Thaler

Subscriber
Joined
Nov 19, 2017
Messages
4,376
Location
Vienna/Austria
Format
35mm
I vote for the MD-4.

I don't have that, but I did just start bidding on a MD-12 for my FM. It is listed as 'parts or repair.' I don't have experience with any of the Nikon add-on motor drives yet.

I'll be working on the Minolta Dynax 7000i for a while longer.

Here are my posts about the MD-4.

I'll continue working on this topic, of course.

 

Gregory_Nolan

Subscriber
Joined
Mar 27, 2017
Messages
47
Location
Austria
Format
Multi Format
I'd be very interested in the A-1, I'd even have a camera for you to work on with interesting problems.
 

Gregory_Nolan

Subscriber
Joined
Mar 27, 2017
Messages
47
Location
Austria
Format
Multi Format
There are already many repair reports on Canon A, so I won't be able to contribute anything new.

I tend to disagree. You produce top-notch repair reports with detailed pictures. It's not every day you see reports like that.
 

Gregory_Nolan

Subscriber
Joined
Mar 27, 2017
Messages
47
Location
Austria
Format
Multi Format
What about cameras like the Minolta Hi-Matic F?
 
OP
OP

Andreas Thaler

Subscriber
Joined
Nov 19, 2017
Messages
4,376
Location
Vienna/Austria
Format
35mm
What about cameras like the Minolta Hi-Matic F?

I worked on the youngest member of the Hi-Matic family here:

 
Cookies are required to use this site. You must accept them to continue using the site. Learn more…