Developing trays - all the same?

Theo43 · Nov 12, 2009

One of the things on my 'to get' list is a set of three plastic developing trays for 11x14 prints. I am aware of three brands, namely, Arista, Paterson, and Yankee. Do you have preferences among these or other brands and, if so, why? Thanks,
Ted

fschifano · Nov 12, 2009

I like the flat bottomed Dead Link Removed trays myself. They're white and they get stained but that's just cosmetics and I don't care about that. I don't print much at any one time, so I don't need a lot of volume to counter exhaustion. These trays work well with as little as 1L of solution. Less waste. I like that.

panchro-press · Nov 12, 2009

I like the Cesco dimpled bottom trays. I develop sheet film and they work well.

-30-

Nicholas Lindan · Nov 12, 2009

Cesco - they make several grades, get the ones with the shiny finish. The ones with the mat finish adsorb chemicals, and of course they stain.

I haven't used the Paterson, but Paterson as a rule makes very high quality gear.

mwdake · Nov 12, 2009

I like and use the Paterson trays.
Very rigid, nice deep grooves in the bottom and come in different colors.
Can't say I have ever used any others even though I have a set of 8x10 no name, 11x14 Kodak with flat bottom and used to have a set of stainless.

Anscojohn · Nov 12, 2009

Theo43 said:
One of the things on my 'to get' list is a set of three plastic developing trays for 11x14 prints. I am aware of three brands, namely, Arista, Paterson, and Yankee. Do you have preferences among these or other brands and, if so, why? Thanks,
Ted

*******
I have used the same Paterson trays for many years.

jeroldharter · Nov 12, 2009

The Yankee trays I have are hard plastic and come in various colors including black, yellow, red and white. I like them best for film development with a slosher.

For paper, I prefer Patterson trays which have recessed grooves on the bottom which help with agitating and picking up prints from the tray. They also have a pouring spout on one corner. I like the 14x17 size for 8x10 and 11x14 paper. Works good with 2000 ml of solution.

For larger trays for 16x20 and 20x24, I use the Cesco trays.

I agree that the glossy surfaces are good for trays. No matter which brand, keep them clean.

fotch · Nov 12, 2009

The Cesco trays are good, my favorite is the Kodak trays, don't know if still available. Got some used, like new.

Larry.Manuel · Nov 12, 2009

My 20x24 Paterson tray came by special order through my local store. It's very nice; I don't regret paying $110 for it. I use it for singe-tray processing. It's made of thick, smooth polypropylene, something likely to last 50 years.

Larry, Kingston, Ont.

MattKing · Nov 12, 2009

These trays, available from Henry's, are probably similar to the Paterson trays, which are good:

http://www.henrys.com/webapp/wcs/stores/servlet/ItemsDisplay?storeId=10001&catalogId=10001&departmentId=10403&categoryId=10431&itemID=42208

The Cesco trays with dimpled bottoms look good to me, because they appear to stack very well and store in a very small space.

Matt

Denis R · Nov 13, 2009

flat bottom troubles

the problem with flat bottom trays is the tendency for paper to stick to the bottom

which makes for not fun trying to push the paper to get it unstuck

nick mulder · Nov 13, 2009

If you are tray developing film watch out for the dimpled part - something to do with the plastic moulding process - it will scratch your 8x10 negs when you agitate ('click clack') nicely over an area approx 3x4" area :rolleyes: (emulsion side is worse, but base isn't immune)

I sanded mine down flat with the rest of the tray - no more probs, did wonder however why this problem hadn't been mentioned anywhere that I could find up to that point ...

Jesper · Nov 13, 2009

In the developing process it is OK with trays with ridges or canals.
Avoid flat ones and the ones with small cupolas since the papers will cling to the bottom.
The maker is usually unimportant. If the quality feels right it will work ok.

If you plan to tone your prints, avoid the ones with ridges. If the print isn't flat the chemicals may deposit unevenly and you will end up with striped prints.
You can use flat bottomed trays for toning if you want to be on the safe side, but the ones with canals works well for all purposes in my experience.

These are just my experinces, hopefully they can be helpful to others.

Neal · Nov 13, 2009

Dear Ted,

I love Paterson trays. I love them so much that when I use the MAMA darkroom in Chicago (shameless plug) I drag mine with when printing 11x14 (the one size they don't have in Paterson trays).

Neal Wydra

Stan160 · Nov 13, 2009

I find ridged-base trays don't work so well on the warming plate I use for lith developing because very little surface area is in contact. Something else to bear in mind.

Ian

Wrobel Photographic · Nov 13, 2009

I have 13 of the Arista trays in various sizes and they work very well. I believe they are rebranded Paterson trays as they look the same at a lesser cost.

Reinhold · Nov 13, 2009

They're only TRAYS, for cryin' out loud...

Get on Craig's list and go scrounging.
Get whatever you can find.
Cheap.
Lot's of 'em these days
Get a mongrel mix in any size you'll need now & in the future.
Some will work better for specific tasks than others, but you'll find that out as you go...

Darkroom life is more than Designer Brand trays.

Sheesh.

Reinhold

www.classicBWphoto.com

photomem · Nov 13, 2009

I agree with the mongrel mix. I just finished JB Welding and re-enameling four 11X14 trays from probably 40 years ago. They were free, in good shape except some enamel nicks and one rust hole, and it took me about 10.00 in supplies to repair them and make them safe for photo chemistry again. Before that, I was using cat litter pans I picked up at the drug store.

Theo43 · Nov 13, 2009

Reinhold said:
They're only TRAYS, for cryin' out loud...

Get on Craig's list and go scrounging.
Get whatever you can find.
Cheap.
Lot's of 'em these days
Get a mongrel mix in any size you'll need now & in the future.
Some will work better for specific tasks than others, but you'll find that out as you go...

Darkroom life is more than Designer Brand trays.

Sheesh.

The whole bloody point of asking for opinions is to learn from the experience of others, so as to not needlessly flush $$ down the drain; something like 'measure twice and cut once'. Sheesh indeed.
Ted

Doremus Scudder · Nov 16, 2009

Paterson (or the knock-offs). They are deep, oversized so that the prints aren't crowded and have wide grooves to get fingers/tongs under. For film developing they are my only choice; smooth bottoms for no scratches!

Yes, you can get other trays that work just fine, but if you are buying your first batch, just get the best. There is a big difference in trays. I've had some would barely fit the size paper they were intended for. The Paterson (and Cesco dimple-bottomed) trays are generous in dimension. And, at Freestyle's prices you don't even have to try to snag used ones on auction sites.

Best

Doremus Scudder
www.DoremusScudder.com

Theo43 · Nov 17, 2009

I have got sets of Paterson trays sized for 5x7 and 11x14 papers. Thank you all for your opinions and advice.
Ted

Developing trays - all the same?

Theo43

fschifano

panchro-press

Nicholas Lindan

Advertiser

mwdake

Anscojohn

jeroldharter

fotch

Larry.Manuel

MattKing

Moderator

Denis R

nick mulder

Jesper

Neal

Stan160

Wrobel Photographic

Reinhold

photomem

Theo43

Doremus Scudder

Theo43

Developing trays - all the same?

Advertiser

Moderator

Privacy & Transparency

Privacy & Transparency