Developer for Bergger 200

OP
OP

eclarke

Member
Joined
Jun 11, 2004
Messages
1,950
Location
New Berlin,
Format
ULarge Format
Donald Miller said:
I have used ABC Pyro (contact printing) and Pyrocat HD (enlarging) with that film.

I am rotary processing, maybe I will give the PMK a whirl..Thanks..Evan
 

bruce terry

Member
Joined
May 14, 2006
Messages
190
Location
Cape Fear NC
Format
35mm RF
Standard formula PMK is fine for tray dev. of BGR200 but for rotary processing you should use Rollo Pyro or one of the other more suitable pyro formulas.
 

Rolleijoe

Member
Joined
Dec 16, 2004
Messages
524
Location
S.E. Texas
Format
Medium Format
I've used HC-110 diluted 1:50 from the syrup. But since Bergger is just Forte, Rodinal should be just fine as well.
 
Joined
Oct 20, 2004
Messages
1,093
Location
Fond du Lac, WI
Format
Multi Format
Bergger 200 is really grainy. Depending on your enlargement factor and taste, you may want to use a fairly fine-grained developer like D76 or Xtol. When I tried it, I used PMK in a Jobo, using 30% extra A, as per Anchell and Troops suggestion. It worked OK, and it stains like mad. My 16x20's from N developed 4x5 film looked very good, but larger prints had more grain than I like to see with large format. If you have to do any expansion development, you'll get really, really large grain.
 
Cookies are required to use this site. You must accept them to continue using the site. Learn more…