Delta 3200 in D-76 (1:1)?

Hey folks,

I checked Freestyle's film developing chart and they don't seem to have a development time for Delta 3200 in D-76 (mixed 1:1). Does anyone know from experience on how long the film should be in the developer for? I use D-76 (1:1) as a one shot developer.

Thanks,

Jason

BTW, my first roll actually came out! No scanner or loupe, so I can't really tell how it turned out, but I made about a gajillion mistakes. Still, there's an image Thanks for your help everyone! This is addicting!

Look here if it exists they should have it..................

http://www.digitaltruth.com/devchart.html

Well now that I looked they dont have it, but they have a time for stock.

It looks as though D-76 1:1 is not recommended for Delta 3200.

The time for Delta 3200 (shot at ISO 3200) in stock D-76 is 10-1/2 minutes at 20 degrees C. But the spaces in the Ilford Film Processing Chart (downloadable from the Ilford website) corresponding to D-76 1:1 for this film are blank, whereas they are filled in for other films.

Might be worth just trying stock D-76.

Thanks guys. I'll use the stock solution!