De Vere enlarger

Iantoz

Hi all, I have just become the proud owner a De Vere 203 enlarger, with Dichromt MkII head, universal timer and 203/504 tran-stab power supply.
It also came with a 35mm Roll Film Mask and a Recessed Lensmount with 39mm Leica thread, and what I need is an instruction manual.
I plan to use it for 35m and 120 6x6 neg printing and enlarging. I have a couple of 50m enlarger lenses and I obviously need another lens and film mask.
I have on order a 24V 250 Watt ecl lamp, so it just needs some TLC and it will be ready to use.
It is an enormous beast compared to my Durst F30, and I now have a real incentive to get on and build my darkroom !!!

Dai the impatient.
 

pentaxpete

Well done - I had the chance of a FREE De Vere 203 BUT it would not FIT onto my darkroom bench OR under the ceiling -- it was from a deceased Camera Club member.
 
OP
OP

Iantoz

Well yes I know what you mean, it is very large.
Fortunately I am building my darkroom from scratch and I have built the bench for the De Vere and am in the process of setting it up, before I continue with the the sink and other bench not to mention the walls and door.

It still has a fault with the control of the lamp, which is permanently "on" but I have tested the control unit which seems to functioning as it should. The fault I believe is in the power supply, some information would be a great help.

But as a retired gentle man I have a lot of time to amuse myself.
 
  • Iantoz
  • Deleted
OP
OP

Iantoz

Well success with my De Vere 203 enlarger, it 's all working now.

All I now need is a Flat lens board and a lens for 120 film enlarging. ( I have a recessed lens board and some 50mm lenses for 35mm film).

Dai the happy.
 
Cookies are required to use this site. You must accept them to continue using the site. Learn more…