TheTrailTog
Allowing Ads
For sale is a De Vere 504. I got this as a chassis and spent some time sourcing all the parts to get it working. The sale includes the following:
* De Vere 504 tabletop chassis. The chassis has definitely seen some use, but is fully functional mechanically. This has some wiring attached to it which I believe is the wiring to be motorized, but I don't have that accessory to test it.
* Intrepid LED cold light head and controller. This was a limited release put out by Intrepid a few years ago and works for both color and B&W. Works great for B&W, but never tested for color. Very low hours on this, maybe 40 - 50?
* De Vere 504 Dichromat MkIV Single Lamp Head. This powered up and you can adjust the filters. I bought the accessory cable to make it compatible with any timer, but my Gralab died after a couple minutes. Not sure if this was an issue with the timer or the power supply. I didn't use or test it any further. So this may need some work.
* Masking negative carrier with AN glass
* 3D printed top and bottom masks for 35mm, 6x6, 6x9, and 6x12
* Beseler ColorPro 135mm f/5.6 lens
* Manuals for the enlarger and the Intrepid cold light head
Asking $1200 OBRO. Pick up is in Southern Maine. I'm about 1.5 hours north of Boston, MA and about 40min south of Portland, ME.
5% to Photrio.
Feel free to reach out with any questions or for more pics
* De Vere 504 tabletop chassis. The chassis has definitely seen some use, but is fully functional mechanically. This has some wiring attached to it which I believe is the wiring to be motorized, but I don't have that accessory to test it.
* Intrepid LED cold light head and controller. This was a limited release put out by Intrepid a few years ago and works for both color and B&W. Works great for B&W, but never tested for color. Very low hours on this, maybe 40 - 50?
* De Vere 504 Dichromat MkIV Single Lamp Head. This powered up and you can adjust the filters. I bought the accessory cable to make it compatible with any timer, but my Gralab died after a couple minutes. Not sure if this was an issue with the timer or the power supply. I didn't use or test it any further. So this may need some work.
* Masking negative carrier with AN glass
* 3D printed top and bottom masks for 35mm, 6x6, 6x9, and 6x12
* Beseler ColorPro 135mm f/5.6 lens
* Manuals for the enlarger and the Intrepid cold light head
Asking $1200 OBRO. Pick up is in Southern Maine. I'm about 1.5 hours north of Boston, MA and about 40min south of Portland, ME.
5% to Photrio.
Feel free to reach out with any questions or for more pics