peter k.
Member
Dark slide felt on c2 Calumet roll film back has gone bad, any suggestions of were, and what kind of felt to replace it.
Hmmm...the old one, does definitely looks like felt.. not velvet.I would not use felt,
I am surprised by that. But to be fair I never did a side by side test, between felt and velvet as seal.Hmmm...the old one, does definitely looks like felt.. not velvet.
Hmmmm, this is getting very interesting... Investigating a light flare between shots, we took the unit apart, and found the dark slide felt was in fact was embedded as you you stated. Used a dry old toothbrush we cleaned it up, but found with further testing that there still is a light leak flare there and it needs to be replaced.(But velvelt should be more elastic and have the ability to "swallow" parts instead of embedding them in its surface.)
They have both; felt with and without the adhesive.Hmmm...the old one, does definitely looks like felt.. not velvet.
Thanks Shutterfinger ..but the self adhesive back is really not necessary Kino, as it is stamped inside a metal holder, which is going to be interesting in gently prying it open.
Thought we would use a thin flat knife blade.
Any other suggestions?
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links. To read our full affiliate disclosure statement please click Here. |
PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY: ![]() |