Crown Graphic shutter lever for 152mm Ektar

campy51

Subscriber
Joined
Oct 16, 2014
Messages
1,215
Location
Boston area USA
Format
Multi Format
Anyone have a suggestion or is there a separate lever for the Kodak Ektar 152mm lens to be used with the side shutter release on a top mounted view finder Crown? Maybe this lens wasn't meant to be used on a Crown but only view camera.
 

Attachments

  • DSC05141.jpg
    840.6 KB · Views: 60

MTGseattle

Subscriber
Joined
Dec 8, 2013
Messages
1,385
Location
Seattle
Format
Multi Format
Does your flat actuation lever miss the little lever in the lens? Does the "button" on the lens lever itself need to be reversed? I,e; that little knurled ring/nut needs to be on the lens board side, and the longer part out towards the subject? Maybe?
 

Dan Fromm

Member
Joined
Mar 23, 2005
Messages
6,823
Format
Multi Format
The Pacemaker Graphics all a+have the same lever.

Ian

No, they are shutter specific.

OP, your lens, or rather its shutter, wasn't made to be used on a specific camera.

I'm not sure where to find a paddle that will work with your 152/4.5 Ektar's shutter. Have you considered trying to make one?
 
OP
OP

campy51

Subscriber
Joined
Oct 16, 2014
Messages
1,215
Location
Boston area USA
Format
Multi Format
I will be looking to find something that I can make one. The problem I will have is I will have to swap it when I want to use my 135mm lens.
 

Dan Fromm

Member
Joined
Mar 23, 2005
Messages
6,823
Format
Multi Format
I will be looking to find something that I can make one. The problem I will have is I will have to swap it when I want to use my 135mm lens.

That's part of Pacemaker Graphics' charm.
 
Cookies are required to use this site. You must accept them to continue using the site. Learn more…