contrast filters for Bessler MCRX 4x5 B&W enlarger

edboy

Member

Joined

Jul 6, 2011

Messages

3

Format

4x5 Format

• Jul 15, 2011

• #1

I'm looking for some 5" X 5" or around that size contrast filters for a Bessler enlarger MCRX 4x5 B&W. There is a drawer above the condenser and I would like to put them above the negative. Can anybody recommend where I might find something or are they still available? I'm using Ilford Multigrade paper. Not sure if that will make a differance. I believe I read that Kodak makes that type of filter. I'm just new to LF.

 

George Nova Scotia

Subscriber

Joined

Mar 17, 2010

Messages

991

Location

Milford, Nova Scotia

Format

Multi Format

• Jul 15, 2011

• #2

Ilford MG filters should still be available at your favorite retailer, online, if not local. You'll need the 6"x6" size and have to trim them a bit. I think with the Beseler you have to round the back end to fit the drawer. They do fade over time so a new set is not a bad idea.

 

Ian C

Member

Joined

Feb 8, 2009

Messages

1,255

Format

Large Format

• Jul 15, 2011

• #3

Here’s the set. You trim them with scissors to fit your filter drawer. You should have the heat-absorbing glass filter in the slot above the filters to protect the filters from excess heat.

http://www.bhphotovideo.com/c/product/114880-REG/Ilford_1762640_Multigrade_Filter_Set.html

 

OP

OP

edboy

Member

Joined

Jul 6, 2011

Messages

3

Format

4x5 Format

• Jul 15, 2011

• #4

Thanks very much.

 

Rick A

Subscriber

Joined

Mar 31, 2009

Messages

9,942

Location

Laurel Highlands

Format

8x10 Format

• Jul 15, 2011

• #5

I have some Kodak Wratten filters that I used to use in my Beseler. If you are in the States you can have them for free. Send me a PM with your address if you want them.

 

Wade D

Member

Joined

Feb 15, 2006

Messages

897

Location

Jamul, CA

Format

Multi Format

• Jul 16, 2011

• #6

I use the Ilford 6"x6" set as well on my MCRX. They fit perfectly after a careful rounding of the back edge.