nnitzky
Allowing Ads
- Joined
- Sep 5, 2015
- Messages
- 3
- Format
- 35mm
Hello all, I am new here but am an established member at FredMiranda under the same user name with 25+ positive feedback and also on eBay with the same user name with 270+ positive transactions.
I have for sale:
Excellent condition Contax RTS body with Real Time Winder and a nifty infrared remote transmitter and receiver. This camera was used on a microscope for hand surgery and hardly saw any use. It was always indoors in an operating room attached to a microscope, so the lens mount and pressure plate are perfect - never had lenses mounted or dismounted, and no dust or particulate matter to scratch the pressure plate in the OR. The body has hardly any marks at all, considering its age. There is a paint scratch on the corner of the winder, a slight indentation in the leather on the camera back, and in the hot shoe there is some residue of what was probably some adhesive to hold the infrared receiver in place. It is just a film over a portion of the hotshoe and won't affect electrical connection at all. Includes the original RTS manual and a body cap (not pictured). Everything seems to work perfectly, even the IR remote. I don't have any lenses to test with, but the camera is in great shape and should work just fine. More photos here:
https://www.dropbox.com/sh/0m5njti382sdynj/AADsysY6mhJBkz8SwP7_Cu9Ra?dl=0
Looking for $175 shipped and insured to CONUS address and I eat the PayPal fees.
I have for sale:
Excellent condition Contax RTS body with Real Time Winder and a nifty infrared remote transmitter and receiver. This camera was used on a microscope for hand surgery and hardly saw any use. It was always indoors in an operating room attached to a microscope, so the lens mount and pressure plate are perfect - never had lenses mounted or dismounted, and no dust or particulate matter to scratch the pressure plate in the OR. The body has hardly any marks at all, considering its age. There is a paint scratch on the corner of the winder, a slight indentation in the leather on the camera back, and in the hot shoe there is some residue of what was probably some adhesive to hold the infrared receiver in place. It is just a film over a portion of the hotshoe and won't affect electrical connection at all. Includes the original RTS manual and a body cap (not pictured). Everything seems to work perfectly, even the IR remote. I don't have any lenses to test with, but the camera is in great shape and should work just fine. More photos here:
https://www.dropbox.com/sh/0m5njti382sdynj/AADsysY6mhJBkz8SwP7_Cu9Ra?dl=0
Looking for $175 shipped and insured to CONUS address and I eat the PayPal fees.
