cleaning 5x4 glass plates

w rollinson

Member
Joined
Nov 12, 2006
Messages
77
Location
HORNSEA ,EAS
Format
35mm
hi all i have just been given 4 glass negatives to have a go at contact printing they look very nice but have some marks on the glass is it possible to clean or should i just print and see how they come out .all help is much needed.
 

reellis67

Subscriber
Joined
Mar 10, 2005
Messages
1,885
Location
Central Flor
Format
4x5 Format
If the marks are on the back (not the emulsion side) you may be able to clean them with simple glass cleaner. Just be certain not to get any on the emulsion side while doing this (and try not to get finger prints on the emulsion side either). Apply the glass cleaner to a lint-free cloth first, and sparingly, and then carefully wipe the spots rather than spraying the cleaner on the glass.

I've got a number of glass plate negatives in my collection and most all of them have some small amount of frilling of the emulsion around the edges, which leads me to believe that the adhesion of the emulsion could be fairly easily damaged if not handled with care. If in doubt, just leave it be.

- Randy
 
Cookies are required to use this site. You must accept them to continue using the site. Learn more…