Canon rangefinder banding

Recent Classifieds

Forum statistics

Threads
199,929
Messages
2,798,954
Members
100,079
Latest member
Hectic_Vic
Recent bookmarks
0
Joined
Sep 27, 2016
Messages
40
Location
Seoul, South Korea
Format
Multi Format
Greetings!
I've been running some films through my newly acquired Canonet ql17 and I observed a weird phenomenon at fast shutter speed and closed apertures. Please see the image attached. This image was captured at f16 and 1/500 s. The same camera, with the same roll of film, worked perfectly shooting at f1.7 and 1/125 s.
Is it light leaks? is it banding?
Whatever it is,how can I get rid of it?
Any clues are much appreciated.
 

Attachments

  • Untitled.jpg
    Untitled.jpg
    31.7 KB · Views: 158
OP
OP
Anirudha Ambekar
Joined
Sep 27, 2016
Messages
40
Location
Seoul, South Korea
Format
Multi Format
I've seen something similar to this with my canon-p.
Its not as bad and only shows a slight hint of banding at the center of the frame. I think under similar shooting conditions.
 

E. von Hoegh

Member
Joined
Sep 14, 2011
Messages
6,197
Location
Adirondacks
Format
Multi Format
Light leaks. The ql 17 has a leaf shutter, the P a focal plane shutter. It is not possible for a leaf shutter to cause banding, this (banding) happens only with focal plane shutters
 

02Pilot

Member
Joined
Feb 9, 2011
Messages
321
Format
Multi Format
Definitely light leaks. Look at the light seal for the bottom of the door for this specific problem, but very likely they all need to be refreshed.
 

ic-racer

Member
Joined
Feb 25, 2007
Messages
16,636
Location
USA
Format
Multi Format
Fast shutter speed and small aperture = bright light situation which can bring out a subtle light leak. What do the negatives look like?
 
OP
OP
Anirudha Ambekar
Joined
Sep 27, 2016
Messages
40
Location
Seoul, South Korea
Format
Multi Format
The light seals on the door are indeed worn and I will replace them. But the leaks are happening selectively at faster shutter speeds only and one would expect light leaks from the door seals to be always present (?).
Although I was thinking light leaks are more likely to occur at slower shutter speeds the higher intensity of light may have contributed to their visibility. But then again if they are linked to the shutter and I am changing the shutter speed and aperture combinations to obtain equivalent exposures each time may be they should always be present?
I'll look at the negatives more closely tonight.
 

02Pilot

Member
Joined
Feb 9, 2011
Messages
321
Format
Multi Format
Light leaks around the body can be difficult to track down, especially if they appear intermittently. Sometimes you'll have one that only lets light in at very specific angles to the source, and thus it will only appear in some frames. I suspect ic-racer's supposition is correct that it is more about the light conditions than the shutter speed or aperture setting.
 
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab Blue Moon Camera & Machine
Top Bottom