I've Beseler 67 printmaker and I'm using it to do my own B&W prints, I want to start learning color printing so I was looking for beseler color heads and found this one, can I use it instead of the head installed already? Is it any good?
There are a number of different (but similar) colour heads designed to be used on Beseler 67 series enlargers. I could be wrong, but I think a "67C" head is actually a simple condenser head (not a colour head) whereas a "Dichro 67" head is a colour head.
As I understand it then, the head should work fine on the printmaker chassis.
Some of the newer heads have built in power supplies, but most of the older heads required a separate power supply, and different versions required different power supplies, so make sure that it either functions without a separate power supply or comes with the correct power supply.
At least one head required a separate power supply but used a standard wall plug to connect to it - if you plug the cord from the head directly into either a timer or the wall, the bulbs will blow!
yeah the head looks like the attached one, is it easy to remove the current head and install the color head? i tried to search the web for the manual but can't find it
yeah the head looks like the attached one, is it easy to remove the current head and install the color head? i tried to search the web for the manual but can't find it
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links. To read our full affiliate disclosure statement please click Here.
