Cable to connect Stop Clock and a Zone Analyzer meter

I recently received a Zone Analyzer meter to go with my Stop Clock timer, by RHDesigns.

I now realize I need a connecting cable between the two devices. I am thinking I should be able to make one, rather than order from over seas.

Can anyone tell me if it is just a simple pair wire with 1/8 inch plugs on the end? Looks that way.... Looks like a trip to Radio Shack is in order.

Hi !
Have you contacted Richard Ross of RH Designs ?
He will give you first hand advice ;-)
And may be able to send a drawing for proper cabling....
Just my 2 ¢

Linking StopClock and Zone Analyser

Hi,

Dr Ross informs me, when I was linking the two:

It is a standard 3.5mm stereo jack-jack lead

You can just make it up yourself, or RH Designs is very helpful.

Have fun,
Craig