C41 Flexicolor chemistry questions

PVia

Member
Joined
Oct 3, 2006
Messages
1,057
Location
Pasadena, CA
Format
Multi Format
Hi all...

I need some clarification re exactly which chemicals to buy. It's very confusing to see this-and-that starter, this-and-that replenisher, etc...

Exactly what the heck do I need?

I'll be using a Phototherm processor...

Thanks!

Paul
 

Photo Engineer

Subscriber
Joined
Apr 19, 2005
Messages
29,018
Location
Rochester, NY
Format
Multi Format
Unless you are runniing a seasoned process, you do not need any sort of starter.

If you use a seasoned process, you only need the developer starter.

PE
 
OP
OP

PVia

Member
Joined
Oct 3, 2006
Messages
1,057
Location
Pasadena, CA
Format
Multi Format
So, starting out...all I need is each chemical in the "XXX and replensisher" version...?
 

Photo Engineer

Subscriber
Joined
Apr 19, 2005
Messages
29,018
Location
Rochester, NY
Format
Multi Format
You would need C41 developer, no starter and RA-RT developer replenisher, no starter for film and paper respectively. The rest of the chemistry is an "I don't care" situation as to what you get whether replenisher or the straight chemistry.

PE
 
OP
OP

PVia

Member
Joined
Oct 3, 2006
Messages
1,057
Location
Pasadena, CA
Format
Multi Format
Great...so bleach and fix is "whatever"...as well as stabilizer.

So, that's it?

You've been a great help, sir!

Paul
 

Neal

Subscriber
Joined
Dec 3, 2004
Messages
2,020
Location
Chicago, West Suburbs
Format
Multi Format
Dear Paul,

Here is a link to the Kodak site with all the necessary information. Use the instructions for rotary tube processors.

http://www.kodak.com/global/en/business/retailPhoto/techInfo/zManuals/z131.jhtml

Below is an excerpt from the first document in the list showing the items you will need. Note that "Kodak Fixer and Replenisher" is one product.


KODAK FLEXICOLOR Chemicals for Rotary-Tube Processors, Small Tanks, and
Unreplenished Sink Lines

These chemicals are designed for use in unreplenished batch systems—e.g., small tanks, rotary tubes, and small-volume
sink lines. They are ready to use as mixed without adding starter. Note: For higher-volume replenished sink-line systems, it is
more practical to use larger chemical sizes. You can prepare tank solutions of developer and bleach by adding the
appropriate starters to the replenisher solutions.

KODAK FLEXICOLOR Developer - Use this developer in unreplenished systems. No starter is needed.
• Available in a size to make 1 U.S. gallon.
KODAK FLEXICOLOR Bleach III - Use this bleach full-strength in small tanks and tube-type processors without replenishment.
• Available in a size to make 1 U.S. gallon.
KODAK FLEXICOLOR Fixer and Replenisher Mix according to the directions for use as a working solution.
• Available in sizes to make 1 and 5 U.S. gallons.
KODAK FLEXICOLOR Stabilizer III - Mix according to the directions for use as a working solution.
• Available in a size to make 1 U.S. gallon.

Neal Wydra
 
OP
OP

PVia

Member
Joined
Oct 3, 2006
Messages
1,057
Location
Pasadena, CA
Format
Multi Format
Much thanks, Neal!

I'm looking forward to adding this process to my darkroom craft...your post and link is much appreciated.

A big thanks to PE for your answer and the many answers you've contributed on my many searches throughout APUG.
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…