hi
just for info
i am not new to colordevelopment and been useing a jobo atl2+ for years and just switch to a fuji mininlab machine
it as fuji fb232b if any wants to know
i cleaned the whole machine and made shure everything works, which it does
my issue
i mix my fuji c41 chemicals as normal but for 10l and measured 5l ofg water and pour it into the replenishertank. then i mixed all the chemicalparts into a 5l jug and filled with water to make another 5l.
unfortunaltly the mix with chemicals was more then the replenisher tank could handle and overflowed a bit mide pouring of the mix. i drained the tank immediatly
i am left with 9,4l of solution without starter and an uncertain amount of the 5l mix with cehms.
my question
can i still use it or should i discard it
alternatively i would use it in my jobo with starter (how much though) and compensate for it with processing time as the developer is mainly in a wrong dilution
any help is apreciated
thx
claudio
just for info
i am not new to colordevelopment and been useing a jobo atl2+ for years and just switch to a fuji mininlab machine
it as fuji fb232b if any wants to know
i cleaned the whole machine and made shure everything works, which it does
my issue
i mix my fuji c41 chemicals as normal but for 10l and measured 5l ofg water and pour it into the replenishertank. then i mixed all the chemicalparts into a 5l jug and filled with water to make another 5l.
unfortunaltly the mix with chemicals was more then the replenisher tank could handle and overflowed a bit mide pouring of the mix. i drained the tank immediatly
i am left with 9,4l of solution without starter and an uncertain amount of the 5l mix with cehms.
my question
can i still use it or should i discard it
alternatively i would use it in my jobo with starter (how much though) and compensate for it with processing time as the developer is mainly in a wrong dilution
any help is apreciated
thx
claudio
Last edited: