Breaking DX

Oranges

A
Oranges

  • 4
  • 0
  • 87
Charging Station

A
Charging Station

  • 0
  • 0
  • 82
Paintin' growth

D
Paintin' growth

  • 3
  • 0
  • 78
Spain

A
Spain

  • 5
  • 0
  • 73

Recent Classifieds

Forum statistics

Threads
198,117
Messages
2,769,882
Members
99,563
Latest member
WalSto
Recent bookmarks
0

BetterSense

Member
Joined
Aug 16, 2008
Messages
3,151
Location
North Caroli
Format
35mm
I got an XA4 that has DX film speed encoding. Since I almost never actually shoot film at the box speed, none of my other cameras have DX coding, and I constantly use film speed to adjust exposure in these little programmed cameras, I want to defeat the DX coding. Recently I've been taping over the cartridges, however I don't always have tape, and I always am second-guessing whether I remembered to apply the tape after the film is already loaded. Anyone ever do anything clever to defeat DX sensing before?
 

TimVermont

Member
Joined
Mar 8, 2005
Messages
468
Location
Boston
Format
Multi Format
Clear nail lacquer over the electrical contacts will insulate them & solve the problem.
 

David A. Goldfarb

Moderator
Moderator
Joined
Sep 7, 2002
Messages
19,974
Location
Honolulu, HI
Format
Large Format
Porter's Camera sells DX labels to reset the DX code. B&H has some as well, I think. I usually give my wife bulk loaded TX with an EI 800 DX sticker to shoot in her Yashica T4s and process in Acufine for EI 800.
 
Last edited by a moderator:

Sirius Glass

Subscriber
Joined
Jan 18, 2007
Messages
50,262
Location
Southern California
Format
Multi Format
Then it meter will go to the default rating, probably something like ISO 100. I am sure that will really help you when you are shooting film rated by the manufacturer at ISO 25.
 
OP
OP
BetterSense

BetterSense

Member
Joined
Aug 16, 2008
Messages
3,151
Location
North Caroli
Format
35mm
Porter's Camera sells DX labels to reset the DX code.
I don't really want to reset it to a fixed value; I need the ASA dial for exposure control. Today I was shooting ISO 200 film with the ASA dial set to 25, PLUS I was using the +1.5 backlight setting. Snow scenes really fool these cameras' meters.

On some cameras defeating the DX will cause the camera to default...my wife's N75 defaults to 100 which works out great for bulk-loaded slide film. But the XA4 has a ASA selection dial. On this camera, defeated DX appears to default to the ASA dial. A good thing, since I use the ASA adjustment on a constant basis.

I'll have to give the clear nail polish a try. Tape over the actual camera contacts might work too, if there is room.
 

darinwc

Subscriber
Joined
Dec 14, 2003
Messages
3,126
Location
Sacramento,
Format
Multi Format
Why dont you try taping over the contacts in the camera?
That way, you will not have to tape every roll of film you use.
But it will be reversible if you ever want to sell it.

Another alternative, start bulk loading film.
 
OP
OP
BetterSense

BetterSense

Member
Joined
Aug 16, 2008
Messages
3,151
Location
North Caroli
Format
35mm
I'll go back to bulk loading when I can't get Arista Premium any more. The Arista Premium bulk price isn't significantly cheaper than the pre-rolled price. It's a different story with many other films of course.
 

Steve Smith

Member
Joined
May 3, 2006
Messages
9,109
Location
Ryde, Isle o
Format
Medium Format
So is the ISO setting dial only active if the film is not DX coded? (or the contacts are isolated?).


Steve
 
OP
OP
BetterSense

BetterSense

Member
Joined
Aug 16, 2008
Messages
3,151
Location
North Caroli
Format
35mm
Well, the camera has DX contacts in it, and it also has an ASA dial that goes from 25 to 1600. When i tape over the silver pads on the cartridges, the film speed dial seems to have its effect. So I think it if the DX contacts detect DX coded film, the ASA dial is worthless, but if it does not, then it uses the ASA dial.
 

benjiboy

Subscriber
Joined
Apr 18, 2005
Messages
11,953
Location
U.K.
Format
35mm
Try putting a DX coded cassette in it at say 100 ISO take a meter reading, then set 200 I.S.O on the film speed dial and take another reading, and see if there is one stop difference in the exposure, in some cameras the DX can be overridden in this way.
 

tim_walls

Member
Joined
Sep 6, 2006
Messages
1,122
Location
Bucuresti, R
Format
35mm
Well, the camera has DX contacts in it, and it also has an ASA dial that goes from 25 to 1600. When i tape over the silver pads on the cartridges, the film speed dial seems to have its effect. So I think it if the DX contacts detect DX coded film, the ASA dial is worthless, but if it does not, then it uses the ASA dial.

Sounds to me like the suggestion of taping over the contacts in the camera is the best bet.


What I'd do is put a bit of paper in the film compartment over the contacts, and tape it down at one edge so you can either fold the paper over the contacts or fold it back the other way so it just sits in the compartment. That way you can decide whenever you put a roll of film in whether you want DX (fold paper out of the way) or not (fold over contacts.)
 
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab Blue Moon Camera & Machine
Top Bottom