BPH 200 & PYROCAT HD IN JOBO

sanking

Member
Joined
Mar 26, 2003
Messages
5,437
Location
Greenville,
Format
Large Format
Bruce (Camclicker) said:
Anyone have experience with his combination that would suggest development time?
Click to expand...

Bruce,

How will you be printing the negatives? VC silver, AZO, Pt./PD.?

I have tested this film several times with rotary agitation and have some fairly good data.

Sandy
 
OP
OP

Bruce Osgood

Membership Council
Member
Joined
Sep 9, 2002
Messages
2,642
Location
Brooklyn, N.Y.
Format
Multi Format
sanking said:
Bruce,

How will you be printing the negatives? VC silver, AZO, Pt./PD.?

I have tested this film several times with rotary agitation and have some fairly good data.

Sandy
Click to expand...
The prints will be enlargements of 4X5 negs.; VC Silver Fiber (MG Warmtone); the Jobo is CPE 2 with lift.
Thank you again (and again), you are really helpful. I'm sure your "fairly good data" is better than any I could drum up.
 

sanking

Member
Joined
Mar 26, 2003
Messages
5,437
Location
Greenville,
Format
Large Format
Bruce (Camclicker) said:
The prints will be enlargements of 4X5 negs.; VC Silver Fiber (MG Warmtone); the Jobo is CPE 2 with lift.
Thank you again (and again), you are really helpful. I'm sure your "fairly good data" is better than any I could drum up.
Click to expand...

Bruce,

Use the 1:1:100 dilution of Pyrocat-HD at 72º F. Develop with rotary agitation (slow) for the following times.

SBR 9 (N -0.5) 6:00 minutes
SBR 7 (N) 9:30 minutes
SBR 6 (N+0.5) 15:00 minutes

This should get you into the ballpark, but test carefully with your own equipment and materials.

Best,

Sandy
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…