Bowens pulsar TX for RZ67II?

mgifotografie

Member

Joined

Jul 1, 2013

Messages

7

Format

Medium Format

• Jul 1, 2013

• #1

I recently bought a nice Mamiya RZ67II set and want to use the RZ67II for studio shoots. My studio lighting set consists of Bowens flashes triggered with the Bowens Pulsar tx. Can I use the pulsar tx for the RZ67II as well (pulsar tx on the hotshoe)? Or do I need a sync cable between lens and flash head?

Thank you!

Regards,

Mark

 

Xuco Martin

Member

Joined

Mar 15, 2013

Messages

39

Location

Madrid Espa

Format

Medium Format

• Jul 1, 2013

• #2

I do not have the Pulsar tx, but the easiest thing is you to realize a shoe-mounted tests should have no problems with logic speeds, if you want to be sure or need faster speeds if you put a cable from the PC socket. From the Pulsar tx horn lens should properly synchronize at any speed without having to use a long cable so annoying

 

OP

OP

mgifotografie

Member

Joined

Jul 1, 2013

Messages

7

Format

Medium Format

• Jul 1, 2013

• #3

Thanks! I'll give it a try.

 

RichardH

Member

Joined

Jun 13, 2012

Messages

172

Location

Morganton, N

Format

Multi Format

• Jul 1, 2013

• #4

I don't have the Pulsar but I have the Yongnu system and it works great. I use mine with the RB67 Pro S. and other cameras.

 

polyglot

Member

Joined

Jun 12, 2009

Messages

3,467

Location

South Australia

Format

Medium Format

• Jul 1, 2013

• #5

There is a direct electrical connection from the PC socket on the lens to the hotshoe on the body, nothing between them except a bit of wire. If the system works via PC-sync, it will work equally well on the RZ hot shoe. They're only physically-different connectors.