'blad EL/M problem.

I have not used my EL/M body for some considerable time and recently decided to bring it into service. I puchased a new battery (ouch!) and gave it a full charge in the camera but when I tried the release I got nothing but a soft click from within the body. To make matters worse I attached a lens which although has located in the mount will not fully lock into place nor will it release from the body. I suspect that the body must have been mid cycle before the battery was charged but I am puzzled as to why it did not complete the cycle when the lock lever was moved to '0' position.
Can anyone advise please?

Regards - Allan.

If possible I'd take it to a certified Hasselblad repair person.

I believe you can go in through the back and unscrew a small plate where the cocking mechanism is at the bottom of the lens opening.

I've had this happen too but didn't want to mess around with this so I took it to a repair person and they fixed it in a few minutes.

Once the lens is removed from the camera, remember to take a coin and recock the shutter.

Michael MCBlane

Allan Swindles said:

I suspect that the body must have been mid cycle before the battery was charged but I am puzzled as to why it did not complete the cycle when the lock lever was moved to '0' position.
Can anyone advise please?

Click to expand...

I had more or less the same problem but was stupid enough to provoke it myself by playing on the O-L-T switch, interrupting the winding-cycle. This can not be cured by the usual methods for "soft" or "hard" lockups as with the manual cameras where you can also play on the winding crank while working inside the body. As Michael said, leave it as it is and have a trained technician look at it. I did not follow this advise and paid for a complete overhaul plus some main wheels and springs in the end (ouch!).

Stefan

Thanks Guys,
You have confirmed my own thoughts - a proper technician it is then.

Regards - Allan.