• Welcome to Photrio!
    Registration is fast and free. Join today to unlock search, see fewer ads, and access all forum features.
    Click here to sign up

Black Specs on Prints

Latest Gallery

Sprung

H
Sprung

  • 2
  • 2
  • 37
Hensol woods

A
Hensol woods

  • 7
  • 1
  • 53

Recent Classifieds

Forum statistics

Threads
202,963
Messages
2,848,182
Members
101,559
Latest member
yiarvan
Recent bookmarks
1

FilmOnly

Member
Allowing Ads
Joined
Jul 3, 2008
Messages
550
Location
Southeastern
Format
35mm
I have been dealing with finding good, reliable processing for a long time. I have yet to try home developing for a number of reasons (time, exposure to chemicals, and printing issues, among others). For the last year or so, I have had good success with a certain pro lab, but recently noticed a black spec on two prints. I know the spec was not anywhere in the frame when I took the shots. The spec is in a different location in each of the shots, and I believe that one appears in frame 8 and the other in frame 11. I called the lab, and was told that a black spec would not be something that resulted from processing (either developing or printing). The person indicated that it was likely a spec or piece of dust on my lens.

I do not buy this explanation, and I cite two reasons for this. First, I have been shooting for years, and I keep my equipment very clean. On almost all occasions, I even blow off the lens (with a Giottos Rocket Blaster) before shooting. Second, a spec would have to be farily large to show up on a negative or print. If internal dust will not cause a problem (again, unless it is significant), then how could a tiny spec--especially on the front surface of the front element--cause a problem? The farther it is from the film, the less chance of a problem arising.

This is the only thing that tempts me toward the dark side, d******. I am tired of having the best shot on the roll occasionally show up with a spec that I know was not there when I released the shutter.
 
Dust during printing will appear white on the print; dust on the lens will appear black.
It could also be slight "scum" which you can feel on the print's surface although when I worked in a lab, this was a very rare occurrence.

D***** is even worse for dust! As an assistant, I kept the lenses scrupulously clean, but dust would always find its way onto the sensor; after every shoot the camera would be sent for cleaning.

Inspect your negatives - if you can see white on them in the same position as the print, it's dust at the time of exposure.
 
The labÂ’s explanation for the black spec is ridiculous.

HereÂ’s why. Consider a tiny point A of the subject. Light reflects in infinitely many directions from A to EVERY point of the front surface of the lens. Light rays from each of these points are refracted by the lens assembly and directed to the single point B on the film that corresponds to A.

A spot on the lens will block only a tiny percentage of all the rays that form the image of A at B. The loss of a few rays wonÂ’t make any meaningful difference in the image on film.
 
These responses are excellent--thank you. They indicate essentially what I had suspected.

Ian C: your analysis in regard to light and how it reflects is exactly what I have understood.

Ian Grant: with regard to your comment on scratches, I reply: exactly!

I verified the frame sequence, and the specs appear on frames 2 and 9 (not 8 and 11). Also, I had shot frame 9 a day after frame 2 (I checked my notes). Further, the film used was Ilford Delta 400. The camera is an Olympus OM2n. The lens for frame 2 was a 50/1.8, and the lens for frame 9 was the 100/2.8.
 
Last edited by a moderator:
FilmOnly said:
Ian Grant: with regard to your comment on scratches, I reply: exactly!

I verified the frame sequence, and the specs appear on frames 2 and 9 (not 8 and 11). Also, I had shot frame 9 a day after frame 2 (I checked my notes). Further, the film used was Ilford Delta 400. The camera is an Olympus OM2n. The lens for frame 2 was a 50/1.8, and the lens for frame 9 was the 100/2.8.
Click to expand...


That confirms it's the lab, there's a similar post maybe yesterday or the day before with dirty B&W negatives. The issue is usually the training and quality of the staff, and how well they treat and maintain equipment..

Doesn't Adorama or one of the other large companies now offer an Ilford service ?

We saw the quality of Ilford's own mail order B&W processing on a factory tour and it's outstanding and the work is checked for quality, and reprinted if necessary.

Find another lab, post a thread ask who's best in your part of the US.

Ian
 
I am considering switching to (yet) another lab. I may open a separate thread for this, but, since this started here, can anyone suggest a lab? Since I already use mail order, location is not all that significant--as long as it is within the continental US.
 
FilmOnly said:
I am considering switching to (yet) another lab. I may open a separate thread for this, but, since this started here, can anyone suggest a lab? Since I already use mail order, location is not all that significant--as long as it is within the continental US.
Click to expand...

Well, one of the sponsors on APUG does high quality black and white film processing, and the cost appears quite reasonable.

http://www.coxblackandwhitelab.com/pyro.htm
 
A little off topic but this is another cool thing to do related to what Ian C wrote above.

A lens can 'see through' any object placed right in front of it as long as the aperture is wider than the object. Put a pencil right in front of the lens. You can 'see through' the pencil until you stop down to the point that the physical aperture size equals the width of the pencil.


With respect to the original post, I'm not sure I follow. Is the defect on the negative the size of a pin hole or smaller? Or does it look like a worm or a fiber?
 
Last edited by a moderator:
I thank you for the Cox suggestion. I looked over their price list. I gather, then, it would be $7.00 to develop a roll of 35mm film, and another $8.00 for a set of corresponding 4x6 RC prints (i.e. "develop and print")? I just want to make sure I am reading it correctly.
 
Even an air bubble in a lens element will not be visible on a negative or print. So the speck of dust theory is more of a myth.


Steve.
 
Okay all debating of lenses aside - what do the actual negatives look like under a loupe?
 
I do not have a loupe. I will go take a look at the negs.

I apologize for my misspelling of "speck" in previous posts.
 
Last edited by a moderator:
I checked the negs with the naked eye and in good natural lighting. Both specks are discernable. Each shows up as a white dot on the neg. One speck is quite easily noticed, and the other takes some more careful inspection, but it is there.
 
I agree, Ian: the attempt to blame it on a dirty lens only shows their incompetence.
 
FilmOnly said:
I thank you for the Cox suggestion. I looked over their price list. I gather, then, it would be $7.00 to develop a roll of 35mm film, and another $8.00 for a set of corresponding 4x6 RC prints (i.e. "develop and print")? I just want to make sure I am reading it correctly.
Click to expand...


I think its $8.00 per print. A contact sheet would be cheaper.
 
FilmOnly said:
I agree, Ian: the attempt to blame it on a dirty lens only shows their incompetence.
Click to expand...

How's the inside of the camera back look on the camera you used to shoot said film? It's totally possible this happened in processing of course but shit happens.

If it's a black and white print you can always knife it and spot it. Probably not fiber tho.
 
I usually look at the shutter curtain, etc., after taking a roll out, and, with regard to said camera, I do not remember seeing anything amiss. I had said camera cleaned and checked before I began using it.
 
George Collier said:
The best lab I know of is the one in your house.
Click to expand...

Possibly not the one specifically in my house!! But a good point.

If you do your own processing you have complete control. The only thing missing is someone to blame when it goes wrong!


Steve.
 
Could be some dust in the camera, just floating around not having much to do except piss you off.
Try a soft brush for the inside, under the mirror too. Then a blower.
 
You must log in or register to reply here.
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:
Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab Blue Moon Camera & Machine
Top Bottom