For Sale beseler 45 parts

[ann]

Am in the process of breaking down a beseler 45 for parts as someone is giving me another. Any one need anything special?

The baseboard is already gone.

 

[Paul VanAudenhove]

PM sent

 

[violaguy]

beseler englarger parts...

Would you happen to have a carrier for 6x7 negatives? My enlarger is a 45M.

Thanks, look forward to your reply!

Nick

Am in the process of breaking down a beseler 45 for parts as someone is giving me another. Any one need anything special?

The baseboard is already gone.

 

[ann]

let me check, i would bet that i do.

ann

 

[Konical]

Good Afternoon, Ann,

Any chance you'd have the two small screws which hold chrome lensboard-securing strip into place? I'd be glad to buy the strip also to make the packaging and mailing at least halfway worthwhile.

Konical

 

[2F/2F]

I definitely need parts! I have been looking for someone who is parting one out for a while now. I need all the screws that hold the columns to the baseboard, and that hold the support struts to the baseboard and to the columns. There should be 10 total, but I will check for sure when I can get to the enlarger.

PM sent as well.

 

[ann]

konical,

i will check. Since posting this message and removing bellows, etc. i thought it was time to throw out the strut, etc. this was of course last night.

Anyway, i have called the school and i don't think the trash has been picked up or the welding class found it to make art, so i will see what else i can gather up for folks,

ann

 

[ann]

i need address, guys,

i have your "parts"

 

[Konical]

"konical,

i will check. Since posting this message and removing bellows, etc. i thought it was time to throw out the strut, etc. this was of course last night.

Anyway, i have called the school and i don't think the trash has been picked up or the welding class found it to make art, so i will see what else i can gather up for folks,"

Good Afternoon, Ann,

If you do have the items I mentioned, please PM with cost, your mailing address, and whether personal check or postal money order should be remitted.

Konical

 

[ann]

Konical

just send me your address, i have the chrome bars and the scres.along with the "spring".
ann

 

[John Koehrer]

Would you have a lamp house and cord & socket for a condenser version?

 

[brian d]

Do you have the brackets that attach the chrome supports to the base?

 

[ann]

john
sorry that part is already sold.

brian,

which brackets do you mean? there are a set that brace the strut running to the back of the enlarger, there is the X shaped device that really holds the sides together.

I probably do, but i will need to get them in the morning when i go into class, so the welding class doesn' snap them up.

 

[brian d]

Sorry I did not see this till today. I was talking about the brackets the support rods screws into. I looked at the Beseler website and it calls them " foot-frame support"

 

[Ian C]

The exploded view of the 45M is here with the parts and the accompanying list of the part names.

Set the magnification to about 800 for easy viewing.

http://www.beselerphoto.com/img/exploded.45mxt.body.gif

 

[ann]

thanks ian,
brian
yes, i did have them yesterday, what is left is sitting in the welding "creative junk yard" let me see if i can get them off. It is doubtful that someone has gotten that far into turning what is left into wonderful "art"

 

[2F/2F]

Well, with that exploded view and parts list, I can go to the hardware store and get the proper screws if needed. But I would definitely prefer them straight from the other enlarger if possible.

The screws I need are:

156 (x4) - hold the frame (161) to the basepan assembly (168)
158 (x4) - hold the bottoms of the rods - frame supports (159) to the basepan assembly (168)
160 (x4) - hold the tops of the rods - frame supports (159) to the frame (161)

 

[ann]

well, i believe that is what i took off yesterday, they are a bit rusty, also removed some from the cross sturt, which isn't shown on the chart, two were stripped so we didn't bother.

so if you want them, send me your mailing address,

 

[brian d]

Ann, I would be very happy if you can manage to get them. The UPS guy broke both of them on my enlarger when he dropped it out of the back of his truck:eek: needless to say it had a lot of problems that had to be taken care of before it was "useable"

 

[ann]

brian,
got them, send me your address. they just screw on easily to the chrome strut. I don't have the screws as i removed them for 2f/ but any should do.

 

[brian d]

Thank You Thank You Thank You!!!!Pm coming

 

[2F/2F]

If he needs the screws, it looks like I have found another source. Might as well keep those screws where they belong.

 

[ann]

well, it is too late, as i am clueless which screws belong with which part.

however, you did start helping others get someplace.

 

[brian d]

That's okay about the screws, I don't need them But thanks for the thought just the same.

 

[CAPTKEVIN]

I also have a beseler 4x5 enlarger for parts so if Ann doesn't have what you want let me know I may have it
Kevin