Basic run down on Luna Pro models

2F/2F

Member
Joined
Apr 29, 2008
Messages
8,031
Location
Los Angeles,
Format
Multi Format
I have been tasked with finding a Gossen Luna Pro or Luna Six by an instructor I assist. He is not good with E-Bay, as he has a busy schedule and is always outbid at the last minute.

He is aware that there is a battery issue on some if not all models. As usual, 625 batteries causing problems for us......

I have used them before, but I am not familiar with the specifics of these meters. Before I start scouring the 'net for one to purchase, what is the basic difference between models, and what is required to power them properly? I am finding reference to the F, S, SBC....

Is there a model I can look for that does not need a $40 adapter?

Thanks in advance.
 
Last edited by a moderator:

jd callow

Moderator
Moderator
Joined
Jan 31, 2003
Messages
8,466
Location
Milan
Format
Multi Format
The F and SBC use common 6volt bateries.
 

benjiboy

Subscriber
Joined
Apr 18, 2005
Messages
11,973
Location
U.K.
Format
35mm
There are all the Gossen meter instruction books on this site http://www.butkus.org/chinon/flashes_meters.htm
the SBC denotes that it uses a Silicon Blue Cell,(not a Cds Cadmium Sulphide one) that is more sensitive, and has a better spectral response.
I would recommend you look for a Lunapro SBC it uses a PP3 9volt battery you can get anywhere, I've used one for more than twenty years,and it's a first class meter. I have owned a Gossen Lunalite, and Lunasix in the past, but because of it's null method reading dial I find this one the best to use.
 
Last edited by a moderator:

Ole

Moderator
Moderator
Joined
Sep 9, 2002
Messages
9,245
Location
Bergen, Norway
Format
Large Format
Gossen have the relevant manuals available for download, so why go throug Butkus?
 

bdial

Subscriber
Joined
Jan 2, 2005
Messages
7,471
Location
North East U.S.
Format
Multi Format
I'll second Ben's recommendation of the SBC, no battery worries, very versatile. Some people don't like the way the scale works, (you center the needle, then the dial shows the exposure). But I find it very fast to use, and comparative readings very easy.

FWIW, a Luna Pro F showed up this morning in the local Craigslist for $50.00; http://nh.craigslist.org/pho/883790754.html
 
Last edited by a moderator:

benjiboy

Subscriber
Joined
Apr 18, 2005
Messages
11,973
Location
U.K.
Format
35mm
The beauty of the null reading dial I find in actual use is it is calibrated in actual stops, and is very easy to see at a glance what the subjects contrast range is by watching the swing of the needle, also to adjust exposure by giving a stop more or less etc.
I bought mine new about twenty years ago and they were very expensive, you can buy them for silly prices nowadays that bear no relation to their value as a lightmeter.
 

papagene

Membership Council
Council
Joined
Jun 11, 2004
Messages
5,438
Location
Tucson, AZ
Format
Multi Format
I use the Luna Pro F and like it quite a lot for the reasons stated above about the null reading. It is a very accurate meter, easy to use. The only two features (or lack of) that I don't like is that it doesn't take the 1 degree adapter and it doesn't have a connector for the flash feature.

gene
 

mikebarger

Member
Joined
Jan 16, 2005
Messages
1,937
Location
ottawa kansas
Format
Multi Format
I bought an SBC at a garage sale years ago, great meter. Although it has been moved to back up for the Pentax V.

Mike
 

MattKing

Moderator
Moderator
Joined
Apr 24, 2005
Messages
53,182
Location
Delta, BC Canada
Format
Medium Format
The SBC is also known as the Profisix in Canada and many other parts of the world.

The instruction manuals for many of the Gossen meters can be found on the Gossen site:

http://www.gossen-photo.de/english/foto_sammler.html

I've had my Profisix for almost 30 years, and it is a great meter.

I now have a Gossen Digiflash as well, for those times when I need something tiny.

Matt
 

Joe VanCleave

Member
Joined
Jan 20, 2004
Messages
677
Location
Albuquerque,
Format
Pinhole
I've found my Luna Pro F to be a very good tool. The only area I think it lacks is when used as an incident meter in street photography, or similar situations where you want to be rather inconspicuous; in which case you have to hold it in front of you and point it back at yourself (the incident dome is on the front end of the housing, rather than the top surface where the controls and readout are at); whereas with meters like the Sekonic, with the white dome on the upper surface of the meter, all you have to do is hold up the meter in front of you and take a reading; just a bit less conspicuous. Check out the documentary "War Photographer" to see what I mean.

~Joe
 

AgX

Member
Joined
Apr 5, 2007
Messages
29,973
Location
Germany
Format
Multi Format
bdial said:
Some people don't like the way the scale works, (you center the needle, then the dial shows the exposure). But I find it very fast to use, and comparative readings very easy.
Click to expand...

The idea is that one does not need to center the needle, but rather place it from the beginning, by turning the dial, on an exposure level as far off center, as one thinks the object's luminance should be placed (eg. +1 for some skin tone).
 

AgX

Member
Joined
Apr 5, 2007
Messages
29,973
Location
Germany
Format
Multi Format
Joe,

I don't get your idea. You can hold the meter as you like, or rather need, freeze the metering and then turn the meter the way that you can see the needle, place it as you like and do the readings from the scale of the dial.


Edit:
For the Profisix there was an swivelling-opaque-sphere adaptor called Profi-lux, enabling you to look at the dial and the same time doing an incident metering to another direction
 
Last edited by a moderator:

jd callow

Moderator
Moderator
Joined
Jan 31, 2003
Messages
8,466
Location
Milan
Format
Multi Format
jnanian said:
i think you mean 9 volt battery ...
Click to expand...

Yep. FWIW I find the F to be a great general purpose meter (although a good spot meter will beat it where spot readings are called for) and the SBC to be the world's greatest low light meter.
 

benjiboy

Subscriber
Joined
Apr 18, 2005
Messages
11,973
Location
U.K.
Format
35mm
Same here

They call them Profisix here in the UK too Matt. and probably in most of Europe, I referred to them as Lunapro SBC for the benefit of "Our American Cousins".
 
Last edited by a moderator:

AgX

Member
Joined
Apr 5, 2007
Messages
29,973
Location
Germany
Format
Multi Format
I guess it would be a good idea if someone could post a list of the US designations next to the original ones.
 

Q.G.

Member
Joined
Jul 23, 2007
Messages
5,535
Location
Netherlands
Format
Medium Format
For some reason i know not, many things from many brands go under different names in the U.S. only. The Profisix is called that everywhere in the world except the U.S.

I have used several Profisix and Lunasix F meters. Great things, but all of mine have suffered the same fate: the needle would start swinging erratically, going to the right end of the scale, hitting the stop rather violently.
I never found the cause, though it appeared to have something to do with a bad contact. I could get the meter to perform that trick by squeezing the meter, or stop it doing so by doing the same.

The potentiometer connected to the scales is fixed to the top half of the body shell. The rest of the electronics is in the bottom half. The connection between the two is made by a few loose ends sticking down from the top half, hoping to hit some tabs in the bottom half. Suspecting that that might be part of the problem, i soldered wires between the contacts (long enough to still be able to open the thing, of course).
It helped! But sadly, only for a while.

I liked these meters enough to have used a bunch of them though.
I stopped (still have a Lunasix F and a Profisix in a box, 'in reserve') when i switched to the Mastersix. Also a great meter, but mine is showing its age now too.
But i often use a metered prism anyway, and i carry a tiny Digisix too, for when a metered prism woud not be the best thing to use.
 

ecodelosandes

Member
Joined
Jan 13, 2009
Messages
6
Location
Mendoza, Arg
Format
Multi Format
Q.G. , I have the same behavior from my SBC time ago, in my case, the solution was simpler: the bad contact were in the battery conecting pad, tighten the open bornes delicately with a plier is enough to refit that thing. It causes no more problem anymore! Hope it help. Regards.

Miguel
 

Q.G.

Member
Joined
Jul 23, 2007
Messages
5,535
Location
Netherlands
Format
Medium Format
Thanks, Miguel.
I will try that (still have my 'last' LunaSix F and Profisix boxed, ready for when i might need them).
 

Venchka

Member
Joined
Sep 9, 2006
Messages
692
Location
Wood County, Texas
Format
35mm
I purchased a Luna-Pro SBC with case and postage for $53.00 USD in November. From the looks of it, I'm not sure it was ever used. That is a significantly better option then my older Luna-Pro and it's PX625 battery requirement. Now I can save my stash of PX625s for my M5 bodies. The swinging needle of the Luna-Pro SBC is much easier for this old geezer to use than the LEDs of the later models. Watching the needle swing from under to overexposure is what I'm used to. Works for me.

I guess this is the U.S. model. I remember wanting one when they were new, but could never afford one.

Dead Link Removed
 

B&Jdude

Member
Joined
Apr 17, 2008
Messages
584
Location
Clinton, AR
Format
4x5 Format
Although I have a Luna-Pro SBC and love it, I still have my old Luna-Pro & Lunasix maters. I sent the older meters out to Quality Metric in California and had them gone over and calibrated. They came back working like new, calibrated to use 625 alkalines, and are right on the money with both my modern needle model and the +/- LED model Gossens.

Smiff
 

pelerin

Member
Joined
Sep 11, 2004
Messages
343
Format
Multi Format
jd callow said:
Yep. FWIW I find the F to be a great general purpose meter (although a good spot meter will beat it where spot readings are called for) and the SBC to be the world's greatest low light meter.
Click to expand...

Um, yeah! It is, as they say, a trip how far out the the thing is calibrated.
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…