Hello, just wondering if anyone knows what filters and/or lens hood would fit a Balda Super Baldax with the Schneider Radionar f2.9? The lens is threaded and measures approximately 40mm on inside, but the only 40mm filter I have on hand is just slightly too small. Having trouble finding examples on interweb or eBay. Thanks!
40.5mm is a standard size (or was, when filters were easier to buy). That's the fitting on my Lubitel 166B. Heliopan (nothing to do with me) make a yellow filter (about fifty dollars!) and a rubber hood (26 dollars) in that size.
This looks like 40.5 mm filter thread. Not all modern filters are available in this size but you can use a step-up ring to adapt larger size filters. Lens hoods are readily available from popular internet auction sites. I bought a few and they are good quality.
Push-on filters and hoods can be used as well but they are rare and do not always fit the lens well even if the nominal diameter is correct.
Lenses with 40.5mm filter thread are pretty common. Try https://filterfind.net/40.5mm_filters.html for some reasonably priced ones. I have no relation to them except being an occasional customer and happy with their product and service
40.5mm is a standard size (or was, when filters were easier to buy). That's the fitting on my Lubitel 166B. Heliopan (nothing to do with me) make a yellow filter (about fifty dollars!) and a rubber hood (26 dollars) in that size.
Lenses with 40.5mm filter thread are pretty common. Try https://filterfind.net/40.5mm_filters.html for some reasonably priced ones. I have no relation to them except being an occasional customer and happy with their product and service
Voigtlander lenses for their Bessamatic and Ultramatic SLRs mostly used 40.5mm. The Skopar X 50mm f2.8s are often practically given away for free when the bodies break, so that might be a source of filters and hoods for you.