Assist in Identifying Old Wood and Brass Plate Camera ?

Whiteymorange

Subscriber
Joined
Jul 27, 2004
Messages
2,387
Location
Southeastern CT
Format
Multi Format
Hi Retro-Vintage and welcome to APUG. I see this is your first post. I can't tell you anything about your camera, but there may be some who can. A few facts about it, like the size, would help a lot.

Good luck,
Whitey
 

alexphoto

Subscriber
Joined
Nov 27, 2005
Messages
35
Location
Devon, South
Format
Multi Format
Hi Retro-Vintage, It's very difficult to identify your camera as so many were made without a name. Is there any thing engraved on the brass lens barrel, that may help if there is. Of course the lens may not be original to the camera.

good luck
Alex
 

removed account4

Subscriber
Joined
Jun 21, 2003
Messages
29,832
Format
Hybrid
hi retro, welcome !

from the images you linked to
it looks like a "tailboard" camera
which means the front standard is stationary
and the back focuses ...

if you measure the ground glass on the rear standard
it will tell you the format, and if there are words written
on the brass barrel and you post them here
there are lens-wizards here that will be able to
tell you lots-and-lots about your lens ...

have fun !
john
 

TheFlyingCamera

Membership Council
Advertiser
Joined
May 24, 2005
Messages
11,546
Location
Washington DC
Format
Multi Format
From the look of it, I'd hazard a guess at 1880-1910 time frame. If the lens is original to the camera (which it looks like it could be), it is possible it's a French camera (although in that time period French lenses were some of the best in the world and were sold everywhere - many American house-label lenses were actually French optics with blank barrels so they could be engraved with the local store's branding).
 

luvcameras

Advertiser
Advertiser
Joined
Jan 11, 2005
Messages
763
Format
Multi Format
As stated above, looks to be a French tailboard camera with Hermagis lens circa 1890. Value is about $ 300.00 +/- 50 USD

You would really need to locate a French collector to help identify the exact maker - but it really doesnt matter given this type of camera is plentiful and not rare (despite who may have made it).

Good luck with Auction Kings
 

Ian Grant

Subscriber
Joined
Aug 2, 2004
Messages
23,269
Location
West Midland
Format
Multi Format
It's also worth remembering that tailboard cameras were in continuous production up until the early 1960's in the UK from Watson's, Gandolfi may have made the odd few since then as well.

There are a few makes that fetch very high prices, but the camera etc needs to be almost mint.

As said above you really need help from France, most UK cameras use similar, or identical brass fittings bought in from specialist brass companies, I've a couple of 1890's catalogues, and it's much the same in the US where you see the same Brass work on competitors cameras.

Interestingly your camera's carrying handle looks like a drawer handle, often camera woodwork was made by cabinet makers.

Ian
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…