Are cibachrome drums OK?

hoffy

Member
Joined
Jan 21, 2009
Messages
3,073
Location
Adelaide, Au
Format
Multi Format
OK, yes, I have decided I want to give RA-4 printing a try and have decided to see if I can get some print drums cheap. I have found a cibachrome drum and motorised roller base on the cheap. I was going to buy it (seriously, a drum is a drum, right?), but thought that I would at least ask here, to ensure that the setup will be fine for what I want to do.

So, am I right? A drum is simply a drum and I should be OK? Or should I leave it on the shelf?

Cheers
 

2F/2F

Member
Joined
Apr 29, 2008
Messages
8,031
Location
Los Angeles,
Format
Multi Format
It will work fine. I have done it myself. As you say, a drum is a drum.
 

srs5694

Member
Joined
May 18, 2005
Messages
2,718
Location
Woonsocket,
Format
35mm
Also, it's possible to do RA-4 in the same trays you use for doing B&W prints. You've just got to work in complete darkness. So if you just want to try RA-4 printing and aren't sure you want to continue with it, you could try it that way and not invest in drums at all. OTOH, some people find working in complete darkness to be very disconcerting, so trying it this way might give you the wrong impression.
 

paul_c5x4

Member
Joined
Apr 22, 2009
Messages
1,942
Location
Ye Olde England
Format
Large Format
Tried using the Jobo drums when I first had a go at RA4 printing. After the first couple of prints, I switched to using trays - Found it much easier and didn't have to worry about drying the drums out each time.
 

EdSawyer

Member
Joined
Sep 3, 2008
Messages
1,793
Format
Multi Format
Ciba drums are great

Some of the best drums made I think. They are not that bad to wash/dry. can be done pretty fast actually since they break down quickly. If you have 2 drums, even better - wash/dry one while the other is processing.

I preferred Ciba drums and a motor base when I was doing RA4 by hand. Easier to do one-shot replenished chemsitry for consistency, and avoided the trouble of working in pitch darkness.

-Ed
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…